Toyota Corolla Bolt Pattern, Center Bore & Wheel Offset (2004–2026)
Toyota Corolla wheel fitment: 5x114.3 bolt pattern, 60.1mm center bore (2017–2026); 5x100 bolt pattern, 54.1mm center bore (2007–2017).
- 5x100bolt pattern (PCD), most common
- 54.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 18 guidesmodel years 2004–2026
Bolt pattern by generation
- 5x100, 54.1 mm center bore — 2004–2025 (10 variants)
- 5x114.3, 60.1 mm center bore — 2017–2026 (8 variants)
Toyota Corolla wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2026 | Toyota Corolla Cross | 5x114.3 | 60.1 mm | 17x6.5J |
| 2025 | Toyota Corolla | 5x100 | 54.1 mm | 18x7.5J ET50 |
| 2023 | Toyota Corolla Cross (EU) | 5x114.3 | 60.1 mm | 17x6.5J |
| 2023 | Toyota Corolla Hatchback | 5x114.3 | 60.1 mm | 16x7.0J |
| 2023 | Toyota Corolla Sedan | 5x100 | 54.1 mm | 16x6.5J |
| 2022 | Toyota Corolla Cross (US) | 5x114.3 | 60.1 mm | 17x6.5J |
| 2021 | Toyota Corolla Cross | 5x114.3 | 60.1 mm | 17x6.5J |
| 2020 | Toyota Corolla Hybrid (US) | 5x100 | 54.1 mm | 15x6.5J |
| 2020 | Toyota Corolla Sedan | 5x100 | 54.1 mm | 16x6.5J |
| 2019 | Toyota Corolla Hatchback | 5x114.3 | 60.1 mm | 16x7.0J |
| 2019 | Toyota Corolla Sedan (EU) | 5x114.3 | 60.1 mm | 16x6.5J |
| 2017 | Toyota Corolla (EU) | 5x114.3 | 60.1 mm | 16x6.5J |
| 2017 | Toyota Corolla (US) | 5x100 | 54.1 mm | 16x6.5J |
| 2014 | Toyota Corolla | 5x100 | 54.1 mm | 16x6.5J |
| 2010 | Toyota Corolla | 5x100 | 54.1 mm | 16x6.5J |
| 2007 | Toyota Corolla | 5x100 | 54.1 mm | 15x6.0J |
| 2005 | Toyota Corolla Sedan | 5x100 | 54.1 mm | 15x6.0J |
| 2004 | Toyota Corolla | 5x100 | 54.1 mm | 15x6.0J |
Factory wheel sizes on the Toyota Corolla
Across the 18 Toyota Corolla trims with a documented factory wheel, the OE diameter is 15-18 inch, width 6-7.5J and offset ET50. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Toyota Corolla (5x100)
Shop all Toyota Corolla forged wheels →
Get a quote for Toyota Corolla wheels
Vehicles With the Same Hub as the Toyota Corolla (5x100, 54.1 mm Bore)
In our database, 3 other vehicle entries from 3 makes use exactly the same 5x100 bolt pattern and 54.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x100 is used by 1.9% of the vehicle pages in our English fitment guide (124 of 6,503); 13.7% of those also use a 54.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 16x6.5J | ET39 | 5.29 in (134 mm) | — | — |
| Flush | 17x7.5J | ET38 | 5.75 in (146 mm) | +12 mm | +14 mm |
| Maximum | 18x8J | ET35 | 5.88 in (149 mm) | +15 mm | +23 mm |
Hub-Centric Rings for a 54.1 mm Center Bore
A wheel with a center bore larger than 54.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 56.1 mm | 56.1 → 54.1 mm |
| 57.1 mm | 57.1 → 54.1 mm |
| 60.1 mm | 60.1 → 54.1 mm |
| 63.4 mm | 63.4 → 54.1 mm |
| 73.1 mm | 73.1 → 54.1 mm |
ANKUSI forged wheels are bored to exactly 54.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Toyota Corolla?
The Toyota Corolla uses a 5x100 bolt pattern on most variants we cover with a 54.1mm center bore. Other generations use 5x114.3 / 60.1mm (2017–2026). Always check the exact year and trim before ordering.
What is the Toyota Corolla center bore?
The hub-centric center bore is 54.1 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Toyota Corolla years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Toyota Corolla?
Any wheel drilled 5x100 with a 54.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.