How many lug bolts does the Acura Integra Type S use?

The Acura Integra Type S uses a 5-lug bolt pattern (5x120), so you need a 5-lug forged wheel to bolt straight on.

What size are the factory (stock) wheels on the Acura Integra Type S?

Factory wheels on the Acura Integra Type S are 19x9.5J F/R at ET60.

Do I need wheel spacers for my Acura Integra Type S?

No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.

What's the difference between wheel offset and backspacing?

Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.

Can I run staggered wheels (different sizes front and rear) on my Acura Integra Type S?

The Acura Integra Type S runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.

← Fitment Guide

Acura Integra Type S (2024-2025) Wheel Fitment

Q: What is the center bore size on the Acura Integra Type S?

The Acura Integra Type S's center bore is 64.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.

Acura Integra Type S (2024-2025): 5x120 bolt pattern, 64.1mm center bore. Factory wheels: 19x9.5J F/R at ET60. Aftermarket reference ranges coming soon.

How to Read Wheel Offset & Measurements

Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.

Diagram showing wheel measurement points: centerline, center bore diameter, PCD, offset, rim width and diameter — Centerline, center bore, PCD, offset, width & diameter

Diagram comparing positive, zero, and negative wheel offset relative to the wheel centerline — Positive vs. zero vs. negative offset

Acura Integra Type S OE Wheel Specs

The 2024-2025 Acura Integra Type S (Sport Compact) uses a 5x120 bolt pattern with a 64.1mm center bore. Factory wheels are 19x9.5J F/R at ET60.

Aftermarket Fitment Data -- Coming Soon

We are still verifying real-world Flush and Maximum Aggressive reference fitments for this exact generation from owner communities, so we are not publishing offset ranges yet rather than guessing. Check back soon, or contact ANKUSI now with your target look and tire size and we will confirm a custom-offset forged wheel build for your Acura Integra Type S directly.

Frequently Asked Questions

What bolt pattern (PCD) does the Acura Integra Type S use?
The 2024-2025 Acura Integra Type S uses a 5x120 bolt pattern.

What is the center bore size on the Acura Integra Type S?
The center bore is 64.1mm. If an aftermarket wheel has a larger center bore, hub-centric rings are recommended.

What size are the factory wheels on the Acura Integra Type S?
Factory wheels are 19x9.5J F/R at ET60.

Can I get a custom offset before your Flush/Max data is published?
Yes -- contact ANKUSI with your bolt pattern and target offset and we will confirm the correct forged wheel spec for your build now.

← Back to the full Fitment Guide · Browse forged wheels