Lincoln OEM-Style Chrome Slotted Disc Forged Wheels
Lincoln Continental / MKZ Fitment · 5-Lug
2007-2015 Lincoln MKX Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Lincoln MKX wheels? This page gives the 2007-2015 Lincoln MKX bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Lincoln MKX rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2007-2015 Lincoln MKX uses a 5x114.3 bolt pattern with a 70.5 mm centre bore and M12x1.5 lug nuts. Factory wheels: 18x8.0J at ET40, front and rear.
Forged wheels for the 2007-2015 Lincoln MKX — drilled 5x114.3 with a 70.5 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in about 25 days.
Get a quote for this car
Lincoln MKX (2007-2015): 5x114.3 bolt pattern, 70.5mm center bore. Factory wheels: 18x8.0J F/R at ET40. Aftermarket sizes confirmed on request.
Bolt Pattern5x114.3
Wheel Bolt/NutM12x1.5 Nut
Center Bore70.5mm
Wheel Load Rating800–950 kg/wheel (Crossover segment reference)
Year2007-2015
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Forged wheels for the Lincoln MKXMachined to the 5x114.3 bolt pattern and 70.5 mm bore · 14–24 inch · offset calculated for your car · 3D drawing before production
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The Lincoln MKX runs a 5x114.3 bolt pattern with a 70.5mm center bore from the factory. We haven't yet verified real-world Flush or Maximum Aggressive offset data for this exact generation from owner communities, so ANKUSI forges to this confirmed OE specification today — or to a wider custom offset once you tell us your target tire size and stance, rather than publishing invented aftermarket numbers.
Lincoln MKX OE Wheel Specs
The 2007-2015 Lincoln MKX (Luxury Crossover) uses a 5x114.3 bolt pattern with a 70.5mm center bore. Factory wheels are 18x8.0J F/R at ET40.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Lincoln MKX (2007-2015) we drill the 5x114.3 pattern and cut the centre bore to 70.5mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Aftermarket Fitment: Confirmed on Request
We are still verifying real-world Flush and Maximum Aggressive reference fitments for this exact generation from owner communities, so we are not publishing offset ranges yet rather than guessing. Contact ANKUSI now with your target look and tire size and we will confirm a custom-offset forged wheel build for your Lincoln MKX directly.
Custom Forged Wheels for the Lincoln MKX (2007-2015)
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 5x114.3 pattern and the 70.5mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose.
Designs we already tool for the 5x114.3 pattern — each one is re-cut to your sizes and offsets:
Lincoln OEM-Style Chrome Slotted Full-Face Forged Wheels – Lincoln Continental / Nautilus Fitment (5-Lug)
Lincoln Continental / Aviator Forged Wheels – Bright Silver 5 W-Spoke Side-Milled
Lincoln OEM-Style Chrome Slotted Disc Forged Wheels – Lincoln Continental / MKZ Fitment (5-Lug)
Lincoln OEM-Style Gloss Black / Red-Milled Twin 8-Spoke Forged Wheels – Lincoln Aviator / Corsair Fitment (5-Lug)Frequently Asked Questions
What bolt pattern (PCD) does the Lincoln MKX use?
The 2007-2015 Lincoln MKX uses a 5x114.3 bolt pattern.
What is the center bore size on the Lincoln MKX?
The center bore is 70.5mm. If an aftermarket wheel has a larger center bore, hub-centric rings are recommended.
What size are the factory wheels on the Lincoln MKX?
Factory wheels are 18x8.0J F/R at ET40.
Can I get a custom offset before your Flush/Max data is published?
Yes -- contact ANKUSI with your bolt pattern and target offset and we will confirm the correct forged wheel spec for your build now.
Vehicles With the Same Hub as the Lincoln MKX (5x114.3, 70.5 mm Bore)
In our database, 155 other vehicle entries from 6 makes use exactly the same 5x114.3 bolt pattern and 70.5 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 12.0% of those also use a 70.5 mm center bore.
Lincoln MKX: Specs by Model Year
| Year | Bolt pattern | Center bore | Factory wheel |
|---|---|---|---|
| 2007-2015 | 5x114.3 | 70.5 mm | 18x8J ET40 |
| 2016-2018 | 5x108 | 63.4 mm | 20x8J ET50 |
Check the model year before ordering: the specs change — bolt pattern 5x114.3 → 5x108 from 2016; center bore 70.5 mm → 63.4 mm from 2016.
Hub-Centric Rings for a 70.5 mm Center Bore
A wheel with a center bore larger than 70.5 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 71.6 mm | 71.6 → 70.5 mm |
| 72.6 mm | 72.6 → 70.5 mm |
| 73.1 mm | 73.1 → 70.5 mm |
| 74.1 mm | 74.1 → 70.5 mm |
ANKUSI forged wheels are bored to exactly 70.5 mm for this vehicle, so no ring is needed.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 18x8 wheels · 18 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Forged Wheel Designs for the Lincoln MKX
Every design below is forged to order, so it can be machined to the Lincoln MKX's 5x114.3 bolt pattern and 70.5 mm center bore, with the width and offset calculated for your setup.
Lincoln OEM-Style Gloss Black / Red-Milled Twin 8-Spoke Forged Wheels
Lincoln Aviator / Corsair Fitment · 5-Lug
BMW M3 CS Handschalter Forged Wheels
Gloss White 10-Spoke · 19-21in, 5×112
Toyota GR Supra MkV Final Edition Forged Wheels
Gunmetal Gray 6-Spoke · 18-20in, 5×112
Lincoln Continental / Aviator Forged Wheels
Bright Silver 5 W-Spoke Side-Milled
Lincoln OEM-Style Chrome Slotted Full-Face Forged Wheels
Lincoln Continental / Nautilus Fitment · 5-Lug
Lincoln OEM-Style Satin Black Multi-Spoke 2-Piece Red-Rivet Floating Cap Forged Wheels
Lincoln Continental / MKZ Fitment · 5-Lug
Lincoln OEM-Style Gloss Black Directional Multi-Spoke Forged Wheels
Lincoln Continental / Aviator Fitment · 5-Lug
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.