2024 Hennessey H850 Mustang Dark Horse Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Hennessey H850 Mustang Dark Horse wheels? This page gives the 2024 Hennessey H850 Mustang Dark Horse bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Hennessey H850 Mustang Dark Horse rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2024 Hennessey H850 Mustang Dark Horse uses a 5x114.3 bolt pattern with a 70.5 mm centre bore. For aftermarket wheels, 19x10J ET24 front / 19x11J ET48 rear sits flush.
Forged wheels for the 2024 Hennessey H850 Mustang Dark Horse — drilled 5x114.3 with a 70.5 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Hennessey H850 Mustang Dark Horse (2024): 5x114.3 bolt pattern, 70.5mm center bore, OE F 19x9.5J ET24 / R 19x10J ET46. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x114.3
Wheel Bolt/Nut1/2\"x20 Nut
Center Bore70.5mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2024
Category5-Lug Standard Sedan
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 19x10J ET24 / R 19x11J ET48 |
Forged Wheel Designs for the Hennessey H850 Mustang Dark Horse
Every design below is forged to order, so it can be machined to the Hennessey H850 Mustang Dark Horse's 5x114.3 bolt pattern and 70.5 mm center bore, with the width and offset calculated for your setup.
Advan-Style Gloss Black 5-Spoke Polished Deep Lip Forged Wheels
Deep Dish · Gloss Black
Vossen HF4-T-Style Gloss Black 5 W-Spoke Forged Wheels
Replica · Gloss Black
Vossen-Style Gloss Black Twisted 5 Twin-Spoke Forged Wheels
Replica · Gloss Black
Advan-Style Gloss White 5-Spoke Forged Wheels
Replica · Gloss White
Kansei-Style Matte Silver 5-Spoke Deep Lip Forged Wheels
Deep Dish · Matte Silver
Rays-Style Brushed Silver 10-Spoke Forged Wheels
Monoblock · Brushed Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A sedan's wheel spec is a balance point the factory tuned between ride comfort, steering feel, and everyday durability. Forging lets us hold that same structural margin while cutting rotational mass, which is where most of the real-world benefit — quicker steering response, marginally better ride — actually comes from.
The Hennessey H850 Mustang Dark Horse ships from the factory on a 5x114.3 bolt pattern with a 70.5mm center bore and a F 19x9.5J ET24 / R 19x10J ET46 wheel. Our flush reference for the Hennessey H850 Mustang Dark Horse is F 19x10J ET24 / R 19x11J ET48.; our maximum aggressive reference is F 20x10J ET20 / R 20x11J ET42. — beyond that, expect clearance issues against the fender liner without further modification.
Hennessey H850 Mustang Dark Horse OE Wheel Specs
The Hennessey H850 Mustang Dark Horse ships from the factory on 5x114.3 bolt pattern wheels with a 70.5mm center bore. The stock wheel size is F 19x9.5J ET24 / R 19x10J ET46, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Hennessey H850 Mustang Dark Horse (2024) we drill the 5x114.3 pattern and cut the centre bore to 70.5mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x9.5J | ET24 | 6.19 in (157 mm) | — | — |
| Flush | 19x10J | ET24 | 6.44 in (164 mm) | +6 mm | +6 mm |
| Maximum | 20x10J | ET20 | 6.29 in (160 mm) | +2 mm | +10 mm |
Vehicles With the Same Hub as the Hennessey H850 Mustang Dark Horse (5x114.3, 70.5 mm Bore)
In our database, 155 other vehicle entries from 6 makes use exactly the same 5x114.3 bolt pattern and 70.5 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 12.0% of those also use a 70.5 mm center bore.
Hub-Centric Rings for a 70.5 mm Center Bore
A wheel with a center bore larger than 70.5 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 71.6 mm | 71.6 → 70.5 mm |
| 72.6 mm | 72.6 → 70.5 mm |
| 73.1 mm | 73.1 → 70.5 mm |
| 74.1 mm | 74.1 → 70.5 mm |
ANKUSI forged wheels are bored to exactly 70.5 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Hennessey H850 Mustang Dark Horse use?
The 2024 Hennessey H850 Mustang Dark Horse uses a 5x114.3 bolt pattern.
How many lug bolts does the Hennessey H850 Mustang Dark Horse use?
The Hennessey H850 Mustang Dark Horse uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Hennessey H850 Mustang Dark Horse?
The Hennessey H850 Mustang Dark Horse's center bore is 70.5mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What does a flush wheel fitment look like on the Hennessey H850 Mustang Dark Horse?
For a flush look with minimal to no rubbing, we recommend F 19x10J ET24 / R 19x11J ET48 as a starting point on a stock or mildly lowered Hennessey H850 Mustang Dark Horse.
Do I need wheel spacers for my Hennessey H850 Mustang Dark Horse?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Hennessey H850 Mustang Dark Horse?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.44" backspacing up front and 7.89" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Hennessey H850 Mustang Dark Horse?
Yes — the Hennessey H850 Mustang Dark Horse's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x9.5 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.