2026 Cadillac Escalade IQL Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Cadillac Escalade IQL wheels? This page gives the 2026 Cadillac Escalade IQL bolt pattern (8x165.1), centre bore, factory rim size and the offset range for aftermarket and forged Cadillac Escalade IQL rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2026 Cadillac Escalade IQL uses a 8x165.1 bolt pattern with a 116.7 mm centre bore and M14x1.5 lug nuts. Factory wheels: 24x9.5J at ET35. For aftermarket wheels, 24x10.5J ET30 sits flush and 26x11J ET25 is the most aggressive fit.
Forged wheels for the 2026 Cadillac Escalade IQL — drilled 8x165.1 with a 116.7 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Cadillac Escalade IQL (2026): 8x165.1 bolt pattern, 116.7mm center bore. Factory wheels: 24x9.5J. Reference fitment ranges.
Bolt Pattern8x165.1
Wheel Bolt/NutM14x1.5 Nut
Center Bore116.7mm
Wheel Load Rating1035–1438 kg/wheel (SUV segment reference)
Year2026
CategoryEV SUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 24x9.5J at ET35 |
| Flush Fitment | 24x10.5J at ET30 offset |
| Maximum Aggressive | 26x11J at ET25 offset |
Forged Wheel Designs for the Cadillac Escalade IQL
Every design below is forged to order, so it can be machined to the Cadillac Escalade IQL's 8x165.1 bolt pattern and 116.7 mm center bore, with the width and offset calculated for your setup.
Chevrolet Silverado 3500HD Dually 8-Lug Forged Wheels
H-Type · Polished
King-Style Matte Black 20-Spoke Bolt Ring Off-Road Forged Wheels
Off-Road · Matte Black
Black Ring Polished Mesh Hex Cap Forged Wheels
Off-Road Beadlock · Polished
Rock Bouncer-Style Gloss Black / Mirror Milled Mesh Beadlock 3-Piece Off-Road Forged Wheels
Off-Road Beadlock · Gloss Black / Mirror Milled
Method Bronze / Gloss Black Custom Beadlock Forged Wheels
Off-Road Beadlock · Bronze / Gloss Black
American Force-Style Polished Mesh Multi-Spoke Off-Road Forged Wheels
Off-Road · Polished
KMC Gloss Black Off-Road Beadlock Forged Wheels
Off-Road Beadlock · Gloss Black
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan — a heavier wheel amplifies body roll and slows steering response exactly where the platform is already working hardest. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The Cadillac Escalade IQL runs a 8x165.1 bolt pattern, 116.7mm center bore, and a 24x9.5J at ET35, front and rear, wheel from the factory. Our Flush Fitment reference is 24x10.5J ET30, which tucks the tire under the fender lip on a stock-height Cadillac Escalade IQL. Our Maximum Aggressive reference is 26x11J ET25 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Cadillac Escalade IQL OE Wheel Specs
The 2026 Cadillac Escalade IQL (EV SUV) uses a 8x165.1 bolt pattern with a 116.7mm center bore. Factory wheels are 24x9.5J at ET35.
Why the factory spec works for most owners:
- Supports the vehicle's curb weight and load capacity
- Preserves ground clearance for everyday and light off-road use
- Balances ride comfort with cargo and passenger stability
- Maintains clearance for the factory suspension travel and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Cadillac Escalade IQL (2026) we drill the 8x165.1 pattern and cut the centre bore to 116.7mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Real-World Fitment Notes
Long wheelbase Escalade IQ, huge factory wheel well clearance
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 24x9.5J ET35 → ~6.63″ backspacing
- Flush: 24x10.5J ET30 → ~6.93″ backspacing
- Max: 26x11J ET25 → ~6.98″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Cadillac spec, or want a wheel built to a custom offset for your Cadillac Escalade IQL? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Vehicles With the Same Hub as the Cadillac Escalade IQL (8x165.1, 116.7 mm Bore)
In our database, 18 other vehicle entries from 4 makes use exactly the same 8x165.1 bolt pattern and 116.7 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
8x165.1 is used by 0.4% of the vehicle pages in our English fitment guide (29 of 6,503); 65.5% of those also use a 116.7 mm center bore.
Hub-Centric Rings for a 116.7 mm Center Bore
A wheel with a center bore larger than 116.7 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 130.1 mm | 130.1 → 116.7 mm |
ANKUSI forged wheels are bored to exactly 116.7 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Cadillac Escalade IQL use?
The 2026 Cadillac Escalade IQL uses a 8x165.1 bolt pattern.
How many lug bolts does the Cadillac Escalade IQL use?
The Cadillac Escalade IQL uses a 8-lug bolt pattern (8x165.1), so you need a 8-lug forged wheel to bolt straight on.
What is the center bore size on the Cadillac Escalade IQL?
The Cadillac Escalade IQL's center bore is 116.7mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Cadillac Escalade IQL?
Factory wheels on the Cadillac Escalade IQL are 24x9.5J at ET35.
What is the biggest wheel size I can fit on my Cadillac Escalade IQL without rubbing?
The most aggressive fitment we recommend without fender work is 26x11J at ET25 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Cadillac Escalade IQL?
For a flush look with minimal to no rubbing, we recommend 24x10.5J at ET30 offset as a starting point on a stock or mildly lowered Cadillac Escalade IQL.
Do I need wheel spacers for my Cadillac Escalade IQL?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Cadillac Escalade IQL?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.93" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Cadillac Escalade IQL?
The Cadillac Escalade IQL runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.