
APEX-Style Brushed Silver Mesh Polished Deep Lip Forged Wheels
Deep Dish · Brushed Silver
Fitting Haval Jolion HEV wheels? This page gives the 2022 Haval Jolion HEV bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Haval Jolion HEV rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2022 Haval Jolion HEV uses a 5x114.3 bolt pattern with a 66.6 mm centre bore. Factory wheels: 18x7J ET40. For aftermarket wheels, 19x8J ET35 sits flush.
Forged wheels for the 2022 Haval Jolion HEV — drilled 5x114.3 with a 66.6 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Haval Jolion HEV (2022): 5x114.3 bolt pattern, 66.6mm center bore, OE 18x7J ET40. Forged wheel fitment specs from ANKUSI.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 18x7J ET40 |
| Flush Fitment | 19x8J at ET35 offset |
Every design below is forged to order, so it can be machined to the Haval Jolion HEV's 5x114.3 bolt pattern and 66.6 mm center bore, with the width and offset calculated for your setup.

Deep Dish · Brushed Silver

Monoblock · Transparent Black

Off-Road · Satin Black

Monoblock · Transparent Gray

Deep Dish · Gloss Black

Monoblock · Gloss Bronze

Replica · Gloss Black

Replica · Bright Silver
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.


SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan — a heavier wheel amplifies body roll and slows steering response exactly where the platform is already working hardest. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The Haval Jolion HEV ships from the factory on a 5x114.3 bolt pattern with a 66.6mm center bore and a 18x7J ET40 wheel. Our flush reference for the Haval Jolion HEV is 19x8J ET35.; our maximum aggressive reference is 19x8.5J ET30. — beyond that, expect clearance issues against the fender liner without further modification.
The Haval Jolion HEV ships from the factory on 5x114.3 bolt pattern wheels with a 66.6mm center bore. The stock wheel size is 18x7J ET40, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Haval Jolion HEV (2022) we drill the 5x114.3 pattern and cut the centre bore to 66.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 18x7J | ET40 | 5.57 in (142 mm) | — | — |
| Flush | 19x8J | ET35 | 5.88 in (149 mm) | +8 mm | +18 mm |
| Maximum | 19x8.5J | ET30 | 5.93 in (151 mm) | +9 mm | +29 mm |
In our database, 14 other vehicle entries from 5 makes use exactly the same 5x114.3 bolt pattern and 66.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 1.2% of those also use a 66.6 mm center bore.
A wheel with a center bore larger than 66.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 67.1 mm | 67.1 → 66.6 mm |
| 70.1 mm | 70.1 → 66.6 mm |
| 70.5 mm | 70.5 → 66.6 mm |
| 71.6 mm | 71.6 → 66.6 mm |
| 73.1 mm | 73.1 → 66.6 mm |
ANKUSI forged wheels are bored to exactly 66.6 mm for this vehicle, so no ring is needed.
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 18x7 wheels · 18 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.