Custom Forged Wheels for the Toyota Sequoia (5x150)
ANKUSI forges custom wheels for the Toyota Sequoia, drilled 5x150 with a 110.1 mm hub-centric bore, so no hub rings or adapters are needed. The factory wheel size in our database is 18x8J ET60 (model year 2020).
Recommended wheel sizes for the Toyota Sequoia
| Type | Size | Offset |
|---|---|---|
| Factory (OE) | 18x8J | ET60 |
| Flush | 18x9J | ET35 |
| Max | 20x9.5J | ET30 |
Flush and max sizes are recommendations from our fitment database; check real clearance on your car before ordering. See bolt pattern and center bore by year for the Toyota Sequoia
Forged wheels that can be drilled for the Toyota Sequoia
Suzuki Jimny / Land Cruiser Forged Wheels – Gloss White Full-Face (5-Lug)
Jeep Wrangler / Toyota Land Cruiser Forged Wheels – Matte Black Slotted Exposed Bolt Detail
Fuel Offroad Metallic Gray 7 Y-Spoke Deep Lip Forged Wheels - Jeep Wrangler / Toyota Land Cruiser Fitment (5-Lug)
Toyota OEM-Style Matte Bronze 10-Spoke Black-Ring Beadlock Off-Road Forged Wheels – Toyota Tundra / Land Cruiser Fitment (5-Lug)
WK-Style Gloss Black 6 X-Spoke White-Ring Beadlock Forged Wheels – Jeep Wrangler / Toyota Land Cruiser Fitment (5-Lug)
WK Wheels Black / Polished Beadlock Forged Wheels – Jeep Wrangler / Toyota Land Cruiser Fitment (5-Lug)
WK Wheels Silver Black-Ring Beadlock Forged Wheels – Jeep Wrangler / Toyota Land Cruiser Fitment (5-Lug)
ECC Green Double-Ring Beadlock Forged Wheels – Jeep Wrangler / Toyota Land Cruiser Fitment (5-Lug)Get a quote for Toyota Sequoia wheels
Vehicles With the Same Hub as the Toyota Sequoia (5x150, 110.1 mm Bore)
In our database, 4 other vehicle entries from 3 makes use exactly the same 5x150 bolt pattern and 110.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x150 is used by 0.2% of the vehicle entries in our database (14 of 6,503); 100.0% of those also use a 110.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 18x8J | ET60 | 6.86 in (174 mm) | — | — |
| Flush | 18x9J | ET35 | 6.38 in (162 mm) | −12 mm | +38 mm |
| Maximum | 20x9.5J | ET30 | 6.43 in (163 mm) | −11 mm | +49 mm |
Hub-Centric Rings for a 110.1 mm Center Bore
A wheel with a center bore larger than 110.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 130.1 mm | 130.1 → 110.1 mm |
ANKUSI forged wheels are bored to exactly 110.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
How to order
- Send your model, year and the size you want on WhatsApp.
- Our team confirms bolt pattern, center bore and offset for your car.
- The set is forged and machined to order in about 25 days, then shipped.
FAQ
How long do custom forged wheels for the Toyota Sequoia take?
About 25 days of production after the specs are confirmed. Every wheel is drilled 5x150 with a 110.1 mm center bore.
What is the factory wheel size of the Toyota Sequoia?
The factory size in our database is 18x8J ET60. It can vary by trim, so check your exact car before ordering.
What wheel size fits the Toyota Sequoia flush?
We recommend 18x9J ET35 for a flush fit and 20x9.5J ET30 as the maximum. Check clearance before ordering.