Toyota Sequoia Bolt Pattern, Center Bore & Wheel Offset (2008–2024)
Toyota Sequoia wheel fitment: 5x150 bolt pattern, 110.1mm center bore (2008–2020); 6x139.7 bolt pattern, 95.1mm center bore (2023–2024). OE wheel sizes and of
- 5x150bolt pattern (PCD), most common
- 110.1 mmcenter bore
- M14x1.5 Nutwheel bolt / nut
- 5 guidesmodel years 2008–2024
Bolt pattern by generation
- 5x150, 110.1 mm center bore — 2008–2020 (3 variants)
- 6x139.7, 95.1 mm center bore — 2023–2024 (2 variants)
Toyota Sequoia wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2024 | Toyota Sequoia TRD Pro | 6x139.7 | 95.1 mm | 18x8.0J |
| 2023 | Toyota Sequoia | 6x139.7 | 95.1 mm | 20x8.5J |
| 2020 | Toyota Sequoia TRD Pro | 5x150 | 110.1 mm | 18x8.0J |
| 2011 | Toyota Sequoia | 5x150 | 110.1 mm | 18x8.0J |
| 2008 | Toyota Sequoia | 5x150 | 110.1 mm | 18x8.0J |
Forged wheels for the Toyota Sequoia (5x150)
Get a quote for Toyota Sequoia wheels
FAQ
What is the bolt pattern on a Toyota Sequoia?
The Toyota Sequoia uses a 5x150 bolt pattern on most variants we cover with a 110.1mm center bore. Other generations use 6x139.7 / 95.1mm (2023–2024). Always check the exact year and trim before ordering.
What is the Toyota Sequoia center bore?
The hub-centric center bore is 110.1 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Toyota Sequoia years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Toyota Sequoia?
Any wheel drilled 5x150 with a 110.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.