Toyota Yaris Bolt Pattern, Center Bore & Wheel Offset (1999–2027)
Toyota Yaris wheel fitment: 4x100 bolt pattern, 54.1mm center bore (1999–2024); 5x114.3 bolt pattern, 60.1mm center bore (2021–2027).
- 4x100bolt pattern (PCD), most common
- 54.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 19 guidesmodel years 1999–2027
Bolt pattern by generation
- 4x100, 54.1 mm center bore — 1999–2024 (16 variants)
- 5x114.3, 60.1 mm center bore — 2021–2027 (3 variants)
Toyota Yaris wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2027 | Toyota Yaris Cross | 5x114.3 | 60.1 mm | 17x7.0J ET45 |
| 2024 | Toyota Yaris | 4x100 | 54.1 mm | 15x6.0J |
| 2024 | Toyota Yaris Cross | 5x114.3 | 60.1 mm | 16x6.5J |
| 2021 | Toyota Yaris Cross | 5x114.3 | 60.1 mm | 16x6.5J |
| 2020 | Toyota Yaris | 4x100 | 54.1 mm | 15x6.0J |
| 2020 | Toyota Yaris Hatchback (US) | 4x100 | 54.1 mm | 16x6.0J |
| 2019 | Toyota Yaris Sedan | 4x100 | 54.1 mm | 16x6.0J |
| 2017 | Toyota Yaris | 4x100 | 54.1 mm | 15x6.0J |
| 2016 | Toyota Yaris Sedan | 4x100 | 54.1 mm | 15x5.5J |
| 2015 | Toyota Yaris | 4x100 | 54.1 mm | 15x5.5J |
| 2013 | Toyota Yaris Hybrid | 4x100 | 54.1 mm | 15x5.5J |
| 2013 | Toyota Yaris Trend | 4x100 | 54.1 mm | 15x6.0J |
| 2012 | Toyota Yaris | 4x100 | 54.1 mm | 15x5.5J |
| 2010 | Toyota Yaris | 4x100 | 54.1 mm | 15x5.5J |
| 2009 | Toyota Yaris | 4x100 | 54.1 mm | 15x5.5J |
| 2007 | Toyota Yaris | 4x100 | 54.1 mm | 14x5.5J |
| 2006 | Toyota Yaris | 4x100 | 54.1 mm | 14x5.5J |
| 2003 | Toyota Yaris | 4x100 | 54.1 mm | 14x5.0J |
| 1999 | Toyota Yaris | 4x100 | 54.1 mm | 13x4.5J |
Factory wheel sizes on the Toyota Yaris
Across the 19 Toyota Yaris trims with a documented factory wheel, the OE diameter is 13-17 inch, width 4.5-7J and offset ET45. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Toyota Yaris (4x100)
Shop all Toyota Yaris forged wheels →
Get a quote for Toyota Yaris wheels
Vehicles With the Same Hub as the Toyota Yaris (4x100, 54.1 mm Bore)
In our database, 123 other vehicle entries from 22 makes use exactly the same 4x100 bolt pattern and 54.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
4x100 is used by 6.9% of the vehicle pages in our English fitment guide (451 of 6,503); 34.4% of those also use a 54.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 15x6J | ET45 | 5.27 in (134 mm) | — | — |
| Flush | 16x6.5J | ET38 | 5.25 in (133 mm) | −1 mm | +13 mm |
| Maximum | 17x7J | ET35 | 5.38 in (137 mm) | +3 mm | +23 mm |
Hub-Centric Rings for a 54.1 mm Center Bore
A wheel with a center bore larger than 54.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 56.1 mm | 56.1 → 54.1 mm |
| 57.1 mm | 57.1 → 54.1 mm |
| 60.1 mm | 60.1 → 54.1 mm |
| 63.4 mm | 63.4 → 54.1 mm |
| 73.1 mm | 73.1 → 54.1 mm |
ANKUSI forged wheels are bored to exactly 54.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Toyota Yaris?
The Toyota Yaris uses a 4x100 bolt pattern on most variants we cover with a 54.1mm center bore. Other generations use 5x114.3 / 60.1mm (2021–2027). Always check the exact year and trim before ordering.
What is the Toyota Yaris center bore?
The hub-centric center bore is 54.1 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Toyota Yaris years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Toyota Yaris?
Any wheel drilled 4x100 with a 54.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.

