Toyota Land Cruiser Bolt Pattern, Center Bore & Wheel Offset (2003–2024)
Toyota Land Cruiser wheel fitment: 5x150 bolt pattern, 110.1mm center bore (2003–2016); 6x139.7 bolt pattern, 95.1mm center bore (2022–2024).
- 5x150bolt pattern (PCD), most common
- 110.1 mmcenter bore
- M14x1.5 Nutwheel bolt / nut
- 7 guidesmodel years 2003–2024
Bolt pattern by generation
- 5x150, 110.1 mm center bore — 2003–2016 (3 variants)
- 6x139.7, 95.2 mm center bore — 2022–2024 (2 variants)
- 6x139.7, 106.1 mm center bore — 2003–2021 (2 variants)
Toyota Land Cruiser wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2024 | Toyota Land Cruiser (US) | 6x139.7 | 95.2 mm | 18x7.5J |
| 2022 | Toyota Land Cruiser | 6x139.7 | 95.2 mm | 18x8.0J |
| 2021 | Toyota Land Cruiser (EU) | 6x139.7 | 106.1 mm | 18x7.5J |
| 2016 | Toyota Land Cruiser | 5x150 | 110.1 mm | 18x8.0J |
| 2013 | Toyota Land Cruiser | 5x150 | 110.1 mm | 18x8.0J |
| 2003 | Toyota Land Cruiser | 5x150 | 110.1 mm | 16x8.0J |
| 2003 | Toyota Land Cruiser 5d | 6x139.7 | 106.1 mm | 16x7.0J |
Factory wheel sizes on the Toyota Land Cruiser
Across the 7 Toyota Land Cruiser trims with a documented factory wheel, the OE diameter is 16-18 inch, width 7-8J. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Toyota Land Cruiser (5x150)
Shop all Toyota Land Cruiser forged wheels →
Get a quote for Toyota Land Cruiser wheels
Vehicles With the Same Hub as the Toyota Land Cruiser (5x150, 110.1 mm Bore)
In our database, 4 other vehicle entries from 3 makes use exactly the same 5x150 bolt pattern and 110.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x150 is used by 0.2% of the vehicle pages in our English fitment guide (14 of 6,503); 100.0% of those also use a 110.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 18x8J | ET60 | 6.86 in (174 mm) | — | — |
| Flush | 20x9J | ET40 | 6.57 in (167 mm) | −7 mm | +33 mm |
| Maximum | 22x10J | ET35 | 6.88 in (175 mm) | 0 mm | +50 mm |
Hub-Centric Rings for a 110.1 mm Center Bore
A wheel with a center bore larger than 110.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 130.1 mm | 130.1 → 110.1 mm |
ANKUSI forged wheels are bored to exactly 110.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Toyota Land Cruiser?
The Toyota Land Cruiser uses a 5x150 bolt pattern on most variants we cover with a 110.1mm center bore. Other generations use 6x139.7 / 95.2mm (2022–2024), 6x139.7 / 106.1mm (2003–2021). Always check the exact year and trim before ordering.
What is the Toyota Land Cruiser center bore?
The hub-centric center bore is 110.1 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Toyota Land Cruiser years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Toyota Land Cruiser?
Any wheel drilled 5x150 with a 110.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.