Ram 1500 Rebel Bolt Pattern, Center Bore & Wheel Offset (2015–2023)
Ram 1500 Rebel wheel fitment: 5x139.7 bolt pattern, 77.8mm center bore (2015–2017); 6x139.7 bolt pattern, 77.8mm center bore. OE wheel sizes and offsets for e
- 5x139.7bolt pattern (PCD), most common
- 77.8 mmcenter bore
- M14x1.5 Nutwheel bolt / nut
- 3 guidesmodel years 2015–2023
Bolt pattern by generation
- 5x139.7, 77.8 mm center bore — 2015–2017 (2 variants)
- 6x139.7, 77.8 mm center bore — 2023 (1 variants)
Ram 1500 Rebel wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2023 | Ram 1500 Rebel Havoc Edition | 6x139.7 | 77.8 mm | 18x8.0J |
| 2017 | Ram 1500 Rebel Blue Streak | 5x139.7 | 77.8 mm | 17x8.0J |
| 2015 | Ram 1500 Rebel | 5x139.7 | 77.8 mm | 17x8.0J |
Factory wheel sizes on the Ram 1500 Rebel
Across the 3 Ram 1500 Rebel trims with a documented factory wheel, the OE diameter is 17-18 inch, width 8J. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Ram 1500 Rebel (5x139.7)
Shop all Ram 1500 Rebel forged wheels →
Get a quote for Ram 1500 Rebel wheels
Vehicles With the Same Hub as the Ram 1500 Rebel (5x139.7, 77.8 mm Bore)
In our database, 15 other vehicle entries from 3 makes use exactly the same 5x139.7 bolt pattern and 77.8 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x139.7 is used by 0.9% of the vehicle entries in our database (56 of 6,503); 50.0% of those also use a 77.8 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 17x8J | ET19 | 5.25 in (133 mm) | — | — |
| Flush | 17x9J | ET0 | 5.00 in (127 mm) | −6 mm | +32 mm |
| Maximum | 18x9J | ET-12 | 4.53 in (115 mm) | −18 mm | +44 mm |
Hub-Centric Rings for a 77.8 mm Center Bore
A wheel with a center bore larger than 77.8 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 78.1 mm | 78.1 → 77.8 mm |
| 84.1 mm | 84.1 → 77.8 mm |
| 93.1 mm | 93.1 → 77.8 mm |
| 100.1 mm | 100.1 → 77.8 mm |
ANKUSI forged wheels are bored to exactly 77.8 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Ram 1500 Rebel?
The Ram 1500 Rebel uses a 5x139.7 bolt pattern on most variants we cover with a 77.8mm center bore. Other generations use 6x139.7 / 77.8mm (2023–2023). Always check the exact year and trim before ordering.
What is the Ram 1500 Rebel center bore?
The hub-centric center bore is 77.8 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Ram 1500 Rebel years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Ram 1500 Rebel?
Any wheel drilled 5x139.7 with a 77.8mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.