Nissan 370Z / Infiniti Q50 Forged Wheels
Brushed Silver 5 Y-Spoke Polished Deep Lip · 5-Lug
Infiniti Wheel Fitment Guide
56 fitment guides for Infiniti, covering 2003 to 2027, spanning 5x112, 5x114.3 and 6x139.7 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Infiniti Bolt Pattern & Center Bore Notes
Based on the 56 Infiniti fitment guides we cover, we have documented 5 distinct bolt pattern / center bore combinations across different Infiniti platforms and model years:
- 5x114.3 bolt pattern, 66.1mm center bore — 47 models we cover, spanning 2003–2027.
- 6x139.7 bolt pattern, 77.8mm center bore — 5 models we cover, spanning 2006–2026.
- 5x112 bolt pattern, 66.6mm center bore — 2 models we cover, spanning 2016–2017.
- 6x139.7 bolt pattern, 100.1mm center bore — 1 model we cover, spanning 2003.
- 6x139.7 bolt pattern, 78.1mm center bore — 1 model we cover, spanning 2011.
Do not mix platforms: a wheel forged for one Infiniti bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Infiniti model, year, and trim and we will confirm the correct spec before production — no guessing required.
How to check the bolt pattern on your Infiniti
The most common Infiniti fitment in our guide is 5x114.3 with a 66.1 mm center bore (47 of 56 model years we cover).
- Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
- No stamping? Measure center-to-center between two adjacent lug holes. For 5x114.3 that distance is 67.2 mm (PCD × sin(180° / 5)). A 2 mm difference already means a different bolt pattern.
- Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
5x114.3 / 66.1mm center bore
G35 (5)
G37 (5)
FX (3)
QX50 (3)
QX60 (3)
M45 (2)
IPL (2)
M35h (2)
Q50 (2)
6x139.7 / 77.8mm center bore
QX80 (3)
5x112 / 66.6mm center bore
6x139.7 / 100.1mm center bore
6x139.7 / 78.1mm center bore
Forged Wheels for Infiniti
Forged-to-order wheel designs matched to Infiniti bolt patterns. Every set is machined to your exact model, offset and center bore.
Nissan 370Z / Infiniti Q50 Forged Wheels
Chrome 5 Y-Spoke · 5-Lug
Wheelforce-Style Matte Silver 10-Spoke Star Forged Wheels
Nissan 370Z / Infiniti Q50 Fitment · 5-Lug
Infiniti OEM-Style Chrome Silver 5-Spoke Y-Design Forged Wheels
Infiniti Q60 Project Black S Concept Fitment · 18-21in, 5×114.3
Rays-Style Matte Bronze 10-Spoke Forged Wheels
Nissan 370Z / Infiniti Q50 Fitment · 5-Lug
Wheelforce-Style Transparent Gray Brushed 10-Spoke Star Forged Wheels
Nissan 370Z / Infiniti Q50 Fitment · 5-Lug
Advan-Style Bronze 5-Spoke Polished Lip Forged Wheels
Nissan 370Z / Infiniti Q50 Fitment · 5-Lug
ECC-Style Transparent Bronze Brushed 5 Y-Spoke Forged Wheels
Nissan 370Z / Infiniti Q50 Fitment · 5-Lug
Vehicles Using 5x114.3 With a 66.1 mm Center Bore
In our database, 178 other vehicle entries from 8 makes use exactly the same 5x114.3 bolt pattern and 66.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 17.3% of those also use a 66.1 mm center bore.
Hub-Centric Rings for a 66.1 mm Center Bore
A wheel with a center bore larger than 66.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.6 mm | 66.6 → 66.1 mm |
| 67.1 mm | 67.1 → 66.1 mm |
| 70.1 mm | 70.1 → 66.1 mm |
| 70.5 mm | 70.5 → 66.1 mm |
| 73.1 mm | 73.1 → 66.1 mm |
ANKUSI forged wheels are bored to exactly 66.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.