Hennessey Wheel Fitment Guide
16 fitment guides for Hennessey, covering 2022 to 2025, spanning 5x114.3, 5x115, 5x120, 6x135 and 6x139.7 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Hennessey Bolt Pattern & Center Bore Notes
Based on the 16 Hennessey fitment guides we cover, we have documented 7 distinct bolt pattern / center bore combinations across different Hennessey platforms and model years:
- 6x135 bolt pattern, 87.1mm center bore — 3 models we cover, spanning 2022–2024.
- 5x114.3 bolt pattern, 70.5mm center bore — 3 models we cover, spanning 2022–2025.
- 5x120 bolt pattern, 66.9mm center bore — 3 models we cover, spanning 2023–2024.
- 6x139.7 bolt pattern, 93.1mm center bore — 2 models we cover, spanning 2022–2023.
- 5x115 bolt pattern, 71.5mm center bore — 2 models we cover, spanning 2023.
- 6x139.7 bolt pattern, 78.1mm center bore — 2 models we cover, spanning 2024.
- 6x139.7 bolt pattern, 77.8mm center bore — 1 model we cover, spanning 2024.
Do not mix platforms: a wheel forged for one Hennessey bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Hennessey model, year, and trim and we will confirm the correct spec before production — no guessing required.
How to check the bolt pattern on your Hennessey
The most common Hennessey fitment in our guide is 6x135 with a 87.1 mm center bore (3 of 16 model years we cover).
- Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
- No stamping? Measure center-to-center between two adjacent lug holes. For 6x135 that distance is 67.5 mm (PCD × sin(180° / 6)). A 2 mm difference already means a different bolt pattern.
- Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
6x135 / 87.1mm center bore
Venom (2)
VelociRaptor (1)
5x114.3 / 70.5mm center bore
5x120 / 66.9mm center bore
H700 (2)
6x139.7 / 93.1mm center bore
5x115 / 71.5mm center bore
6x139.7 / 78.1mm center bore
6x139.7 / 77.8mm center bore
Vehicles Using 5x120 With a 66.9 mm Center Bore
In our database, 159 other vehicle entries from 9 makes use exactly the same 5x120 bolt pattern and 66.9 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle pages in our English fitment guide (670 of 6,503); 24.2% of those also use a 66.9 mm center bore.
Hub-Centric Rings for a 66.9 mm Center Bore
A wheel with a center bore larger than 66.9 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 67.1 mm | 67.1 → 66.9 mm |
| 70.1 mm | 70.1 → 66.9 mm |
| 70.5 mm | 70.5 → 66.9 mm |
| 71.6 mm | 71.6 → 66.9 mm |
| 73.1 mm | 73.1 → 66.9 mm |
ANKUSI forged wheels are bored to exactly 66.9 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.