Buick Encore Bolt Pattern, Center Bore & Wheel Offset (2012–2026)
Buick Encore wheel fitment: 5x105 bolt pattern, 56.6mm center bore (2012–2024); 5x115 bolt pattern, 70.3mm center bore (2023–2026). OE wheel sizes and offsets
- 5x105bolt pattern (PCD), most common
- 56.6 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 18 guidesmodel years 2012–2026
Bolt pattern by generation
- 5x105, 56.6 mm center bore — 2012–2024 (13 variants)
- 5x115, 70.3 mm center bore — 2023–2026 (5 variants)
Buick Encore wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2026 | Buick Encore II Facelift | 5x115 | 70.3 mm | 18x7.5J |
| 2025 | Buick Encore II Facelift | 5x115 | 70.3 mm | 18x7.5J |
| 2025 | Buick Encore Plus | 5x115 | 70.3 mm | 17x7.5J |
| 2024 | Buick Encore II | 5x105 | 56.6 mm | 17x7J |
| 2024 | Buick Encore Plus | 5x115 | 70.3 mm | 17x7.5J |
| 2023 | Buick Encore II | 5x105 | 56.6 mm | 17x7J |
| 2023 | Buick Encore Plus | 5x115 | 70.3 mm | 17x7.5J |
| 2022 | Buick Encore I Facelift | 5x105 | 56.6 mm | 18x7J |
| 2021 | Buick Encore I Facelift | 5x105 | 56.6 mm | 18x7J |
| 2020 | Buick Encore I Facelift | 5x105 | 56.6 mm | 18x7J |
| 2019 | Buick Encore I Facelift | 5x105 | 56.6 mm | 18x7J |
| 2018 | Buick Encore I Facelift | 5x105 | 56.6 mm | 18x7J |
| 2017 | Buick Encore I Facelift | 5x105 | 56.6 mm | 18x7J |
| 2016 | Buick Encore I | 5x105 | 56.6 mm | 18x7J |
| 2015 | Buick Encore I | 5x105 | 56.6 mm | 18x7J |
| 2014 | Buick Encore I | 5x105 | 56.6 mm | 18x7J |
| 2013 | Buick Encore I | 5x105 | 56.6 mm | 18x7J |
| 2012 | Buick Encore I | 5x105 | 56.6 mm | 18x7J |
Factory wheel sizes on the Buick Encore
Across the 18 Buick Encore trims with a documented factory wheel, the OE diameter is 17-18 inch, width 7-7.5J. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Buick Encore (5x105)
Get a quote for Buick Encore wheels
Vehicles With the Same Hub as the Buick Encore (5x105, 56.6 mm Bore)
In our database, 21 other vehicle entries from 3 makes use exactly the same 5x105 bolt pattern and 56.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x105 is used by 0.6% of the vehicle entries in our database (37 of 6,503); 100.0% of those also use a 56.6 mm center bore.
Hub-Centric Rings for a 56.6 mm Center Bore
A wheel with a center bore larger than 56.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 57.1 mm | 57.1 → 56.6 mm |
| 60.1 mm | 60.1 → 56.6 mm |
| 63.4 mm | 63.4 → 56.6 mm |
| 64.1 mm | 64.1 → 56.6 mm |
| 73.1 mm | 73.1 → 56.6 mm |
ANKUSI forged wheels are bored to exactly 56.6 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Buick Encore?
The Buick Encore uses a 5x105 bolt pattern on most variants we cover with a 56.6mm center bore. Other generations use 5x115 / 70.3mm (2023–2026). Always check the exact year and trim before ordering.
What is the Buick Encore center bore?
The hub-centric center bore is 56.6 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Buick Encore years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Buick Encore?
Any wheel drilled 5x105 with a 56.6mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.