MANSORY Black / Polished Slotted Disc Forged Wheels
Replica · Black / Polished
2007 Mansory Rolls Royce Conquistador (Phantom) Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Mansory Rolls Royce Conquistador (Phantom) wheels? This page gives the 2007 Mansory Rolls Royce Conquistador (Phantom) bolt pattern (5x120), centre bore, factory rim size and the offset range for aftermarket and forged Mansory Rolls Royce Conquistador (Phantom) rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2007 Mansory Rolls Royce Conquistador (Phantom) uses a 5x120 bolt pattern with a 72.6 mm centre bore and M14x1.25 lug bolts. Factory wheels: 22x10J ET25. For aftermarket wheels, 22x10.5J ET20 sits flush.
Forged wheels for the 2007 Mansory Rolls Royce Conquistador (Phantom) — drilled 5x120 with a 72.6 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Mansory Rolls Royce Conquistador (Phantom) (2007): 5x120 bolt pattern, 72.6mm center bore, OE 22x10J ET25. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x120
Wheel Bolt/NutM14x1.25 Bolt
Center Bore72.6mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Year2007
Category5-Lug Performance / Tuner
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 22x10J ET25 |
| Flush Fitment | 22x10.5J at ET20 offset |
Forged Wheel Designs for the Mansory Rolls Royce Conquistador (Phantom)
Every design below is forged to order, so it can be machined to the Mansory Rolls Royce Conquistador (Phantom)'s 5x120 bolt pattern and 72.6 mm center bore, with the width and offset calculated for your setup.
Gloss Black Petal Machined Face Forged Wheels
Monoblock · Gloss Black
Gloss White Full-Face Forged Wheels
Monoblock · Gloss White
APEX Chrome Custom Beadlock Forged Wheels
Off-Road Beadlock · Chrome
Fuel-Style Gunmetal Multi-Spoke Bolted Ring Off-Road Forged Wheels
Off-Road · Gunmetal
BBS-Style Metallic Gray Cross-Spoke Mesh Polished Lip Forged Wheels
Monoblock · Metallic Gray
Advan Racing GT-Style Matte Silver 5-Spoke Deep Lip Forged Wheels
Deep Dish · Matte Silver
HRE-Style Polished 5 Y-Spoke Forged Wheels
Monoblock · Polished
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Most of the engineering value in a forged wheel over a cast one shows up in rotational mass, not outright strength — both can meet the same load rating, but the forged piece gets there lighter. On a sedan platform tuned for everyday balance, that weight saving is felt directly in steering response and ride quality.
The Mansory Rolls Royce Conquistador (Phantom) ships from the factory on a 5x120 bolt pattern with a 72.6mm center bore and a 22x10J ET25 wheel. Our flush reference for the Mansory Rolls Royce Conquistador (Phantom) is 22x10.5J ET20.; our maximum aggressive reference is 24x10.5J ET15. — beyond that, expect clearance issues against the fender liner without further modification.
Mansory Rolls Royce Conquistador (Phantom) OE Wheel Specs
The Mansory Rolls Royce Conquistador (Phantom) ships from the factory on 5x120 bolt pattern wheels with a 72.6mm center bore. The stock wheel size is 22x10J ET25, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Mansory Rolls Royce Conquistador (Phantom) (2007) we drill the 5x120 pattern and cut the centre bore to 72.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 22x10J | ET25 | 6.48 in (165 mm) | — | — |
| Flush | 22x10.5J | ET20 | 6.54 in (166 mm) | +1 mm | +11 mm |
| Maximum | 24x10.5J | ET15 | 6.34 in (161 mm) | −4 mm | +16 mm |
Vehicles With the Same Hub as the Mansory Rolls Royce Conquistador (Phantom) (5x120, 72.6 mm Bore)
In our database, 338 other vehicle entries from 10 makes use exactly the same 5x120 bolt pattern and 72.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle pages in our English fitment guide (670 of 6,503); 50.6% of those also use a 72.6 mm center bore.
Hub-Centric Rings for a 72.6 mm Center Bore
A wheel with a center bore larger than 72.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 73.1 mm | 73.1 → 72.6 mm |
| 74.1 mm | 74.1 → 72.6 mm |
| 76.1 mm | 76.1 → 72.6 mm |
| 78.1 mm | 78.1 → 72.6 mm |
ANKUSI forged wheels are bored to exactly 72.6 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Mansory Rolls Royce Conquistador (Phantom) use?
The 2007 Mansory Rolls Royce Conquistador (Phantom) uses a 5x120 bolt pattern.
How many lug bolts does the Mansory Rolls Royce Conquistador (Phantom) use?
The Mansory Rolls Royce Conquistador (Phantom) uses a 5-lug bolt pattern (5x120), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Mansory Rolls Royce Conquistador (Phantom)?
The Mansory Rolls Royce Conquistador (Phantom)'s center bore is 72.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Mansory Rolls Royce Conquistador (Phantom)?
Factory wheels on the Mansory Rolls Royce Conquistador (Phantom) are 22x10J ET25.
What does a flush wheel fitment look like on the Mansory Rolls Royce Conquistador (Phantom)?
For a flush look with minimal to no rubbing, we recommend 22x10.5J at ET20 offset as a starting point on a stock or mildly lowered Mansory Rolls Royce Conquistador (Phantom).
Do I need wheel spacers for my Mansory Rolls Royce Conquistador (Phantom)?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Mansory Rolls Royce Conquistador (Phantom)?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.54" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Mansory Rolls Royce Conquistador (Phantom)?
The Mansory Rolls Royce Conquistador (Phantom) runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 22x10 wheels · 22 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.