
2026 Toyota Aygo X Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Toyota Aygo X wheels? This page gives the 2026 Toyota Aygo X bolt pattern (4x100), centre bore, factory rim size and the offset range for aftermarket and forged Toyota Aygo X rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Forged wheels for Toyota Aygo — styles, sizes & factory quote →
Toyota Aygo X (2026): 4x100 bolt pattern, 54.1mm center bore. Factory wheels: F/R: 17x6.0J at ET40 offset, front and rear. Reference fitment ranges.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F/R: 17x6.0J F/R |
| Flush Fitment | 18x7.0J at ET35 offset |
| Maximum Aggressive | 18x7.5J at ET30 offset |
Forged Wheel Designs for the Toyota Aygo X
Every design below is forged to order, so it can be machined to the Toyota Aygo X's 4x100 bolt pattern and 54.1 mm center bore, with the width and offset calculated for your setup.


BBS-Style Gold Mesh Polished Lip Forged Wheels
Monoblock · Gold

Rays-Style Gunmetal Mesh Polished Deep Lip Forged Wheels
Deep Dish · Gunmetal

OZ Racing-Style Gloss White 15-Spoke Forged Wheels
Monoblock · Gloss White

Bronze Gold Cross-Spoke Forged Wheels
Monoblock · Bronze Gold

APEX-Style Bright Silver 8 Twin-Spoke Mesh Forged Wheels
Monoblock · Bright Silver

Silver Round-Hole Steelie-Style Forged Wheels
Monoblock · Silver

Black / Machined 4-Spoke Forged Wheels
Monoblock · Black Machined
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.


ANKUSI Engineering Expert Advice
Because an SUV's center of gravity is already higher than a sedan's, anything added at the corners — including wheel weight — has an outsized effect on handling balance. A forged wheel lets us hit the visual stance owners want without adding the rotational mass a cast wheel of the same strength would carry.
The Toyota Aygo X runs a 4x100 bolt pattern, 54.1mm center bore, and a 17x6.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 18x7.0J ET35, which tucks the tire under the fender lip on a stock-height Toyota Aygo X. Our Maximum Aggressive reference is 18x7.5J ET30 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Toyota Aygo X OE Wheel Specs
The 2026 Toyota Aygo X (Micro Crossover) uses a 4x100 bolt pattern with a 54.1mm center bore. Factory wheels are F/R: 17x6.0J F/R.
Why the factory spec works for most owners:
- Supports the vehicle's curb weight and load capacity
- Preserves ground clearance for everyday and light off-road use
- Balances ride comfort with cargo and passenger stability
- Maintains clearance for the factory suspension travel and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Toyota Aygo X (2026) we drill the 4x100 pattern and cut the centre bore to 54.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F/R: 17x6.0J ET40 → ~5.07″ backspacing
- Flush: 18x7.0J ET35 → ~5.38″ backspacing
- Max: 18x7.5J ET30 → ~5.43″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Toyota spec, or want a wheel built to a custom offset for your Toyota Aygo X? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Toyota Aygo X use?
How many lug bolts does the Toyota Aygo X use?
What is the center bore size on the Toyota Aygo X?
What size are the factory (stock) wheels on the Toyota Aygo X?
What is the biggest wheel size I can fit on my Toyota Aygo X without rubbing?
What does a flush wheel fitment look like on the Toyota Aygo X?
Do I need wheel spacers for my Toyota Aygo X?
How do I calculate wheel backspacing for my Toyota Aygo X?
What's the difference between wheel offset and backspacing?
Can I run staggered wheels (different sizes front and rear) on my Toyota Aygo X?
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M12x1.5, conical-seat lug nut.
Factory Torque Spec: 103-110 Nm (76-81 ft-lb). Range covers most Toyota passenger cars, crossovers, and light trucks on M12x1.5 studs.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.