Skoda OEM-Style Gloss Black Machined Face Forged Wheels
Monoblock · Gloss Black
2008 Skoda Fabia Combi GreenLine Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Skoda Fabia Combi GreenLine wheels? This page gives the 2008 Skoda Fabia Combi GreenLine bolt pattern (5x100), centre bore, factory rim size and the offset range for aftermarket and forged Skoda Fabia Combi GreenLine rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2008 Skoda Fabia Combi GreenLine uses a 5x100 bolt pattern with a 57.1 mm centre bore and M14x1.5 lug bolts. Factory wheels: 14x5.5J ET40. For aftermarket wheels, 15x6J ET35 sits flush.
Forged wheels for the 2008 Skoda Fabia Combi GreenLine — drilled 5x100 with a 57.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Skoda Fabia Combi GreenLine (2008): 5x100 bolt pattern, 57.1mm center bore, OE 14x5.5J ET40. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x100
Wheel Bolt/NutM14x1.5 Bolt
Center Bore57.1mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Year2008
Category5-Lug Performance / Tuner
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 14x5.5J ET40 |
| Flush Fitment | 15x6J at ET35 offset |
Forged Wheel Designs for the Skoda Fabia Combi GreenLine
Every design below is forged to order, so it can be machined to the Skoda Fabia Combi GreenLine's 5x100 bolt pattern and 57.1 mm center bore, with the width and offset calculated for your setup.
Skoda OEM-Style Black / Machined 5 V-Spoke Machined Face Forged Wheels
Monoblock · Black Machined
APEX-Style Brushed Silver 10 Split-Spoke Forged Wheels
Replica · Brushed Silver
Brushed Silver 5 Split-Spoke Forged Wheels
Monoblock · Brushed Silver
Rays-Style TE37 Saga Gloss White 6-Spoke Forged Wheels
Monoblock · Gloss White
Rays Volk Racing TE37-Style Bronze Gold 6-Spoke Forged Wheels
Replica · Bronze Gold
Rays Volk Racing TE37-Style Matte Silver Forged Wheels
Replica · Matte Silver
Brushed Silver 7 Y-Spoke Side-Milled Forged Wheels
Monoblock · Brushed Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A sedan's wheel spec is a balance point the factory tuned between ride comfort, steering feel, and everyday durability. Forging lets us hold that same structural margin while cutting rotational mass, which is where most of the real-world benefit — quicker steering response, marginally better ride — actually comes from.
The Skoda Fabia Combi GreenLine ships from the factory on a 5x100 bolt pattern with a 57.1mm center bore and a 14x5.5J ET40 wheel. Our flush reference for the Skoda Fabia Combi GreenLine is 15x6J ET35.; our maximum aggressive reference is 16x6.5J ET30. — beyond that, expect clearance issues against the fender liner without further modification.
Skoda Fabia Combi GreenLine OE Wheel Specs
The Skoda Fabia Combi GreenLine ships from the factory on 5x100 bolt pattern wheels with a 57.1mm center bore. The stock wheel size is 14x5.5J ET40, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Skoda Fabia Combi GreenLine (2008) we drill the 5x100 pattern and cut the centre bore to 57.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 14x5.5J | ET40 | 4.82 in (123 mm) | — | — |
| Flush | 15x6J | ET35 | 4.88 in (124 mm) | +1 mm | +11 mm |
| Maximum | 16x6.5J | ET30 | 4.93 in (125 mm) | +3 mm | +23 mm |
Vehicles With the Same Hub as the Skoda Fabia Combi GreenLine (5x100, 57.1 mm Bore)
In our database, 85 other vehicle entries from 11 makes use exactly the same 5x100 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x100 is used by 1.9% of the vehicle pages in our English fitment guide (124 of 6,503); 69.4% of those also use a 57.1 mm center bore.
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Skoda Fabia Combi GreenLine use?
The 2008 Skoda Fabia Combi GreenLine uses a 5x100 bolt pattern.
How many lug bolts does the Skoda Fabia Combi GreenLine use?
The Skoda Fabia Combi GreenLine uses a 5-lug bolt pattern (5x100), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Skoda Fabia Combi GreenLine?
The Skoda Fabia Combi GreenLine's center bore is 57.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Skoda Fabia Combi GreenLine?
Factory wheels on the Skoda Fabia Combi GreenLine are 14x5.5J ET40.
What does a flush wheel fitment look like on the Skoda Fabia Combi GreenLine?
For a flush look with minimal to no rubbing, we recommend 15x6J at ET35 offset as a starting point on a stock or mildly lowered Skoda Fabia Combi GreenLine.
Do I need wheel spacers for my Skoda Fabia Combi GreenLine?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Skoda Fabia Combi GreenLine?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 4.88" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Skoda Fabia Combi GreenLine?
The Skoda Fabia Combi GreenLine runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 14x5.5 wheels · 14 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.