182 vehicle variants in our fitment database ship with 14 inch factory wheels. The most common bolt pattern on these cars is 4x100 (43%), and the typical factory offset is ET40 (range ET0 to ET52.5, 90 variants with a recorded offset). Model years covered: 1957–2026.
Bolt patterns on cars with 14 inch factory wheels
| Bolt pattern | Variants | Share |
|---|---|---|
| 4x100 | 79 | 43% |
| 4x98 | 25 | 14% |
| 4x108 | 24 | 13% |
| 5x120 | 11 | 6% |
| 5x100 | 10 | 5% |
| 4x114.3 | 9 | 5% |
| 5x120.65 | 6 | 3% |
| 3x130 | 5 | 3% |
Factory widths at 14 inch
| Size | Variants | Share |
|---|---|---|
| 14x5.5J | 83 | 46% |
| 14x5J | 39 | 21% |
| 14x6J | 33 | 18% |
| 14x4.5J | 16 | 9% |
| 14x6.5J | 7 | 4% |
| 14x7J | 2 | 1% |
| 14x4J | 2 | 1% |
Common flush-fit upgrade
For cars on 14 inch factory wheels, the most common flush-fit size in our database is 15x6.5J (29% of variants with a flush recommendation). Going 0.5J wider at the same offset moves the outer lip out by about 6 mm, so check fender clearance before ordering.
Vehicles with 14 inch factory wheels
Up to 40 recent models, each linked to its full fitment guide.
| Vehicle | Bolt pattern | Center bore | Factory wheel |
|---|---|---|---|
| Tata Tiago (2026) | 4x108 | 67.1 mm | 14x5J |
| Proton Saga (2025) | 4x114.3 | 67.1 mm | 14x5.5J |
| Volkswagen Up (2024) | 4x100 | 57.1 mm | 14x4J |
| Nissan Sakura (2023) | 4x100 | 54.1 mm | 14x4.5J ET45 |
| Dacia Spring Extreme (2023) | 4x100 | 60.1 mm | 14x4.5J |
| Mitsubishi eK X EV (2023) | 4x100 | 56.1 mm | 14x4.5J ET45 |
| Dacia Spring Electric (2022) | 4x100 | 60.1 mm | 14x4.5J |
| Opel Rocks-e (2022) | 4x108 | 65.1 mm | 14x4J ET35 |
| Datsun GO (2022) | 4x100 | 60.1 mm | 14x5.5J |
| Fiat Panda (2021) | 4x98 | 58.1 mm | 14x5.5J |
| Mitsubishi Mirage (2020) | 4x100 | 56.1 mm | 14x4.5J ET46 |
| Renault City K-ZE (2020) | 4x100 | 60.1 mm | 14x5J ET40 |
| Ford Ka plus (2019) | 4x108 | 63.4 mm | 14x5.5J |
| Mitsubishi Mirage G4 (2017) | 4x100 | 56.1 mm | 14x5.5J ET46 |
| Skoda Citigo (2017) | 4x100 | 57.1 mm | 14x5J ET35 |
| Buick Excelle I Facelift (2016) | 4x114.3 | 56.6 mm | 14x5.5J |
| Geely CK (2016) | 4x100 | 56.6 mm | 14x5.5J |
| Geely GC2 (2016) | 4x100 | 54.1 mm | 14x5J |
| Geely LC Facelift (2016) | 4x100 | 54.1 mm | 14x5J |
| Geely Lc Cross (2016) | 4x100 | 54.1 mm | 14x5J |
| Daewoo Gentra (2016) | 4x114.3 | 56.6 mm | 14x5.5J |
| Toyota Aygo (2015) | 4x100 | 54.1 mm | 14x4.5J ET39 |
| Datsun on-DO (2015) | 4x98 | 58.6 mm | 14x5.5J |
| Datsun mi-DO (2015) | 4x98 | 58.6 mm | 14x5.5J |
| Geely SC3 (2014) | 4x100 | 57.1 mm | 14x5J |
| Volkswagen Vento [IN] (2014) | 5x100 | 57.1 mm | 14x5J |
| Seat Mii (2013-2014) | 4x100 | 57.1 mm | 14x5J ET35 |
| Citroen C1 (2013) | 4x100 | 54.1 mm | 14x4.5J |
| Peugeot 107 (2013) | 4x100 | 54.1 mm | 14x4.5J ET35 |
| Peugeot 107 3-door (2013) | 4x100 | 54.1 mm | 14x4.5J ET35 |
| Skoda Citigo 5-door (2013) | 4x100 | 57.1 mm | 14x5J ET35 |
| Geely LC (2013) | 4x100 | 54.1 mm | 14x5J |
| Wuling Hongguang (2013) | 4x114.3 | 60.1 mm | 14x5J |
| Kia Ray EV (2012) | 4x100 | 54.1 mm | 14x5J |
| Kia Ray (2012) | 4x100 | 54.1 mm | 14x5J |
| Geely GX2 (2012) | 4x100 | 54.1 mm | 14x5J |
| Chevrolet Sail (2011) | 4x100 | 56.6 mm | 14x5.5J ET45 |
| Chevrolet Spark (2010) | 4x100 | 56.6 mm | 14x5J ET45 |
| Nissan NV200 (2010) | 4x114.3 | 66.1 mm | 14x5.5J ET45 |
| Daewoo Matiz Creative (2010) | 4x100 | 56.6 mm | 14x4.5J |
14-inch forged wheels made to order
Every ANKUSI wheel is forged from 6061-T6 aluminium and machined to your bolt pattern, center bore, width and offset. These designs are commonly ordered in 4x100.
FAQ
Which cars come with 14 inch wheels from the factory?
182 variants in our database, most often from Alfa Romeo, Renault, BMW, Chevrolet, Lancia. The table above lists recent models with their bolt pattern and center bore.
What offset do 14 inch factory wheels use?
The median factory offset is ET40, but it ranges from ET0 to ET52.5 depending on the car, so always check the exact model.
Can ANKUSI make 14 inch forged wheels for my car?
Yes. We forge every set to order in about 25 days and machine the bolt pattern, center bore and offset to your exact vehicle, from $220 per wheel.