Ram ProMaster Bolt Pattern, Center Bore & Wheel Offset (2013–2026)
Ram ProMaster wheel fitment: 5x130 bolt pattern, 78.1mm center bore (2013–2026). OE wheel sizes and offsets for every ProMaster variant we cover (4 guides), p
- 5x130bolt pattern (PCD)
- 78.1 mmcenter bore
- Boltwheel bolt / nut
- 4 guidesmodel years 2013–2026
Ram ProMaster wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2026 | Ram ProMaster | 5x130 | 78.1 mm | 16x6J |
| 2023 | Ram ProMaster | 5x130 | 78.1 mm | 16x6J |
| 2022 | Ram ProMaster | 5x130 | 78.1 mm | 16x6J |
| 2013 | Ram ProMaster | 5x130 | 78.1 mm | 16x6J |
Factory wheel sizes on the Ram ProMaster
Across the 4 Ram ProMaster trims with a documented factory wheel, the OE diameter is 16 inch, width 6J. A forged wheel that keeps the 5x130 bolt pattern and the 78.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Ram ProMaster (5x130)
Get a quote for Ram ProMaster wheels
Vehicles With the Same Hub as the Ram ProMaster (5x130, 78.1 mm Bore)
No other make in our database pairs 5x130 with a 78.1 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
5x130 is used by 5.8% of the vehicle entries in our database (372 of 6,396); 0.3% of those also use a 78.1 mm center bore.
Hub-Centric Rings for a 78.1 mm Center Bore
A wheel with a center bore larger than 78.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 84.1 mm | 84.1 → 78.1 mm |
| 93.1 mm | 93.1 → 78.1 mm |
| 100.1 mm | 100.1 → 78.1 mm |
| 106.1 mm | 106.1 → 78.1 mm |
ANKUSI forged wheels are bored to exactly 78.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Ram ProMaster?
The Ram ProMaster uses a 5x130 bolt pattern with a 78.1mm center bore across every ProMaster variant in our database (4 guides, 2013–2026).
What is the Ram ProMaster center bore?
The hub-centric center bore is 78.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Ram ProMaster years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Ram ProMaster?
Any wheel drilled 5x130 with a 78.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.