
2023 Kia Sportage PHEV (US) Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Kia Sportage PHEV (US) wheels? This page gives the 2023 Kia Sportage PHEV (US) bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Kia Sportage PHEV (US) rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Kia Sportage PHEV (US) (2023): 5x114.3 bolt pattern, 67.1mm center bore. Factory wheels: 19x7.5J F/R. Reference fitment ranges.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 19x7.5J F/R |
| Flush Fitment | 20x8.5J at ET38 offset |
| Maximum Aggressive | 21x9.0J at ET35 offset |
Forged Wheel Designs for the Kia Sportage PHEV (US)
Every design below is forged to order, so it can be machined to the Kia Sportage PHEV (US)'s 5x114.3 bolt pattern and 67.1 mm center bore, with the width and offset calculated for your setup.


Satin Gunmetal 5-Spoke Forged Wheels
Monoblock · Satin Gunmetal

Gunmetal Directional Milled Forged Wheels
Monoblock · Gunmetal

Vossen HF-5-Style Bronze Forged Wheels
Replica · Bronze

Kia OEM-Style Gloss Black Multi-Spoke Turbine Forged Wheels
Monoblock · Gloss Black

OZ Racing-Style Polished Turbofan Dish Riveted Lip Forged Wheels
2-Piece · Polished

Gloss Black Y-Spoke Mesh Forged Wheels
Monoblock · Gloss Black

HRE-Style Polished 5 Split Y-Spoke Forged Wheels
Monoblock · Polished
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.


ANKUSI Engineering Expert Advice
The Kia Sportage PHEV (US)'s factory suspension tuning already accounts for a specific unsprung mass target. Forged construction lets ANKUSI match the factory strength spec while keeping rotational weight down, which is where the real handling benefit comes from on a taller, heavier SUV platform.
The Kia Sportage PHEV (US) runs a 5x114.3 bolt pattern, 67.1mm center bore, and a 19x7.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 20x8.5J ET38, which tucks the tire under the fender lip on a stock-height Kia Sportage PHEV (US). Our Maximum Aggressive reference is 21x9.0J ET35 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Kia Sportage PHEV (US) OE Wheel Specs
The 2023 Kia Sportage PHEV (US) (PHEV SUV) uses a 5x114.3 bolt pattern with a 67.1mm center bore. Factory wheels are 19x7.5J F/R.
Why the factory spec works for most owners:
- Balances ride comfort with everyday drivability
- A commonly used size for this vehicle class, supporting parts and tire availability
- Maintains clearance for the factory suspension and brake components
- Provides stable, predictable handling across normal driving conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Kia Sportage PHEV (US) (2023) we drill the 5x114.3 pattern and cut the centre bore to 67.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 19x7.5J ET45 → ~6.02″ backspacing
- Flush: 20x8.5J ET38 → ~6.25″ backspacing
- Max: 21x9.0J ET35 → ~6.38″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Kia spec, or want a wheel built to a custom offset for your Kia Sportage PHEV (US)? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Kia Sportage PHEV (US) use?
How many lug bolts does the Kia Sportage PHEV (US) use?
What is the center bore size on the Kia Sportage PHEV (US)?
What size are the factory (stock) wheels on the Kia Sportage PHEV (US)?
What is the biggest wheel size I can fit on my Kia Sportage PHEV (US) without rubbing?
What does a flush wheel fitment look like on the Kia Sportage PHEV (US)?
Do I need wheel spacers for my Kia Sportage PHEV (US)?
How do I calculate wheel backspacing for my Kia Sportage PHEV (US)?
What's the difference between wheel offset and backspacing?
Can I run staggered wheels (different sizes front and rear) on my Kia Sportage PHEV (US)?
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M12x1.5, conical-seat lug nut.
Factory Torque Spec: 107-127 Nm (79-94 ft-lb). Range covers most Kia passenger cars and crossovers on M12x1.5 studs.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.