
2023 Kia Soul Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Kia Soul wheels? This page gives the 2023 Kia Soul bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Kia Soul rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Kia Soul (2023): 5x114.3 bolt pattern, 67.1mm center bore. Factory wheels: 18x7.5J F/R. Reference fitment ranges.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 18x7.5J F/R |
| Flush Fitment | 19x8.5J at ET40 offset |
| Maximum Aggressive | 20x8.5J at ET35 offset |
Forged Wheel Designs for the Kia Soul
Every design below is forged to order, so it can be machined to the Kia Soul's 5x114.3 bolt pattern and 67.1 mm center bore, with the width and offset calculated for your setup.


Gloss Black Y-Spoke Mesh Forged Wheels
Monoblock · Gloss Black

Vossen HF-7-Style Side-Milled Transparent Gold 10 Y-Spoke Forged Wheels
Replica · Side-milled Transparent Gold

Vossen HF-7-Style Matte Silver Custom Forged Wheels
Replica · Matte Silver

HRE-Style Polished 5 Split Y-Spoke Forged Wheels
Monoblock · Polished

Vossen-Style Bright Silver Y-Spoke Mesh Forged Wheels
Monoblock · Bright Silver

EvoCorse-Style Satin Black 12-Spoke Rally Forged Wheels
Monoblock · Satin Black

Kia OEM-Style Gloss Black Multi-Spoke Turbine Forged Wheels
Monoblock · Gloss Black
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.


ANKUSI Engineering Expert Advice
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan — a heavier wheel amplifies body roll and slows steering response exactly where the platform is already working hardest. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The Kia Soul runs a 5x114.3 bolt pattern, 67.1mm center bore, and a 18x7.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 19x8.5J ET40, which tucks the tire under the fender lip on a stock-height Kia Soul. Our Maximum Aggressive reference is 20x8.5J ET35 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Kia Soul OE Wheel Specs
The 2023 Kia Soul (Crossover) uses a 5x114.3 bolt pattern with a 67.1mm center bore. Factory wheels are 18x7.5J F/R.
Why the factory spec works for most owners:
- Keeps the factory ride quality and noise levels intact
- A common fitment for this class, so replacement tires are easy to source
- Preserves clearance around the OE brakes and suspension geometry
- Delivers predictable, easy-to-live-with handling for daily use
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Kia Soul (2023) we drill the 5x114.3 pattern and cut the centre bore to 67.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 18x7.5J ET45 → ~6.02″ backspacing
- Flush: 19x8.5J ET40 → ~6.32″ backspacing
- Max: 20x8.5J ET35 → ~6.13″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Kia spec, or want a wheel built to a custom offset for your Kia Soul? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Kia Soul use?
How many lug bolts does the Kia Soul use?
What is the center bore size on the Kia Soul?
What size are the factory (stock) wheels on the Kia Soul?
What is the biggest wheel size I can fit on my Kia Soul without rubbing?
What does a flush wheel fitment look like on the Kia Soul?
Do I need wheel spacers for my Kia Soul?
How do I calculate wheel backspacing for my Kia Soul?
What's the difference between wheel offset and backspacing?
Can I run staggered wheels (different sizes front and rear) on my Kia Soul?
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M12x1.5, conical-seat lug nut.
Factory Torque Spec: 107-127 Nm (79-94 ft-lb). Range covers most Kia passenger cars and crossovers on M12x1.5 studs.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.