
2020 Kia Soul EV Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Kia Soul EV wheels? This page gives the 2020 Kia Soul EV bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Kia Soul EV rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Kia Soul EV (2020): 5x114.3 bolt pattern, 67.1mm center bore. Factory wheels: 17x7.0J F/R. Reference fitment ranges.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 17x7.0J F/R |
| Flush Fitment | 18x8.0J at ET40 offset |
| Maximum Aggressive | 19x8.5J at ET38 offset |
Forged Wheel Designs for the Kia Soul EV
Every design below is forged to order, so it can be machined to the Kia Soul EV's 5x114.3 bolt pattern and 67.1 mm center bore, with the width and offset calculated for your setup.


Satin Gunmetal 5-Spoke Forged Wheels
Monoblock · Satin Gunmetal

Vossen HF-7-Style Chrome Mesh Forged Wheels
Replica · Chrome

Vossen HF-7-Style Brushed Silver Multi-Spoke Forged Wheels
Replica · Brushed Silver

Kia OEM-Style Gloss Black Multi-Spoke Turbine Forged Wheels
Monoblock · Gloss Black

OZ Racing-Style Polished Turbofan Dish Riveted Lip Forged Wheels
2-Piece · Polished

Gloss Black Y-Spoke Mesh Forged Wheels
Monoblock · Gloss Black

Vossen-Style Bright Silver Y-Spoke Mesh Forged Wheels
Monoblock · Bright Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.


ANKUSI Engineering Expert Advice
Because an SUV's center of gravity is already higher than a sedan's, anything added at the corners — including wheel weight — has an outsized effect on handling balance. A forged wheel lets us hit the visual stance owners want without adding the rotational mass a cast wheel of the same strength would carry.
The Kia Soul EV runs a 5x114.3 bolt pattern, 67.1mm center bore, and a 17x7.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 18x8.0J ET40, which tucks the tire under the fender lip on a stock-height Kia Soul EV. Our Maximum Aggressive reference is 19x8.5J ET38 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Kia Soul EV OE Wheel Specs
The 2020 Kia Soul EV (EV Crossover) uses a 5x114.3 bolt pattern with a 67.1mm center bore. Factory wheels are 17x7.0J F/R.
Why the factory spec works for most owners:
- Balances ride comfort with everyday drivability
- A commonly used size for this vehicle class, supporting parts and tire availability
- Maintains clearance for the factory suspension and brake components
- Provides stable, predictable handling across normal driving conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Kia Soul EV (2020) we drill the 5x114.3 pattern and cut the centre bore to 67.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 17x7.0J ET45 → ~5.77″ backspacing
- Flush: 18x8.0J ET40 → ~6.07″ backspacing
- Max: 19x8.5J ET38 → ~6.25″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Kia spec, or want a wheel built to a custom offset for your Kia Soul EV? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Kia Soul EV use?
How many lug bolts does the Kia Soul EV use?
What is the center bore size on the Kia Soul EV?
What size are the factory (stock) wheels on the Kia Soul EV?
What is the biggest wheel size I can fit on my Kia Soul EV without rubbing?
What does a flush wheel fitment look like on the Kia Soul EV?
Do I need wheel spacers for my Kia Soul EV?
How do I calculate wheel backspacing for my Kia Soul EV?
What's the difference between wheel offset and backspacing?
Can I run staggered wheels (different sizes front and rear) on my Kia Soul EV?
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M12x1.5, conical-seat lug nut.
Factory Torque Spec: 107-127 Nm (79-94 ft-lb). Range covers most Kia passenger cars and crossovers on M12x1.5 studs.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.