Ford OEM-Style Satin Black 3-Spoke Forged Wheels
Monoblock · Satin Black
Ford Escape Bolt Pattern by Year, Offset & Wheel Sizes
Ford Escape bolt pattern: 5x114.3, 5x108. The table below gives the bolt pattern, centre bore and lug nut for each model year from 2008 to 2023; further down is the full 2023 spec sheet with factory rim size and offset range for aftermarket and forged rims.
Quick answer: The 2023 Ford Escape uses a 5x108 bolt pattern with a 63.4 mm centre bore and M12x1.5 lug nuts. Factory wheels: 18x7.5J, front and rear. For aftermarket wheels, 19x8.5J ET38 sits flush and 20x9.0J ET35 is the most aggressive fit.
Forged wheels for the 2023 Ford Escape — drilled 5x108 with a 63.4 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Ford Escape Bolt Pattern by Year (2008–2023)
Ford Escape has used these bolt patterns: 5x114.3, 5x108 across the model years below. Check your exact year and body style before ordering wheels, then open the full guide for center bore, factory sizes and offset.
| Model year | Version | Bolt pattern | Center bore | Lug nut / bolt | Full guide |
|---|---|---|---|---|---|
| 2008 | Hybrid | 5x114.3 | 67.1mm | M12x1.5 Nut | 2008 Ford Escape fitment |
| 2017 | All body styles | 5x108 | 63.4mm | M12x1.5 Nut | 2017 Ford Escape fitment |
| 2020 | All body styles | 5x108 | 63.4mm | M12x1.5 Nut | 2020 Ford Escape fitment |
| 2023 | All body styles | 5x108 | 63.4mm | M12x1.5 Nut | This page |
Generation-level rows are cross-checked against two independent published wheel-specification sources. Always confirm the hub on your own car before ordering.
Ford Escape (2023): 5x108 bolt pattern, 63.4mm center bore. Factory wheels: 18x7.5J F/R. Reference fitment ranges.
Bolt Pattern5x108
Wheel Bolt/NutM12x1.5 Nut
Center Bore63.4mm
Wheel Load Rating800–950 kg/wheel (Crossover segment reference)
Year2023
CategoryCrossover
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 25, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 18x7.5J F/R |
| Flush Fitment | 19x8.5J at ET38 offset |
| Maximum Aggressive | 20x9.0J at ET35 offset |
Forged Wheel Designs for the Ford Escape
Every design below is forged to order, so it can be machined to the Ford Escape's 5x108 bolt pattern and 63.4 mm center bore, with the width and offset calculated for your setup.
Ford ST OEM-Style Gloss Black 10 Y-Spoke Forged Wheels
Monoblock · Gloss Black
Ford Mustang OEM-Style Light Gunmetal / Gray 5 Y-Spoke Forged Wheels
Monoblock · Light Gunmetal / Gray
Ford OEM-Style Chrome Mesh Polished Deep Lip Forged Wheels
Deep Dish · Chrome
A Forged-Style Gunmetal / Polished Mesh Beadlock Forged Wheels
Off-Road Beadlock · Gunmetal / Polished
Gloss Black Machined 10-Spoke Forged Wheels
Monoblock · Gloss Black / Machined
Platinum Gloss Black 5 Y-Spoke Cut-Out Forged Wheels
Monoblock · Gloss Black
Vossen HF-9-Style Gloss Black Full-Face Bi-Directional Milled Forged Wheels
Replica · Gloss Black
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A compact crossover like the Escape spends most of its life carrying passengers and cargo rather than being driven hard, so the case for forging isn't about outright grip — it's about keeping unsprung mass down so the ride stays composed over the broken pavement this segment actually sees daily. A forged wheel holds the same strength at a lighter weight than the factory cast piece, which helps steering response without sacrificing the load capacity a family crossover needs.
The Escape uses a 5x108 bolt pattern, 63.4mm center bore, and an 18x7.5J wheel front and rear from the factory. Our Flush Fitment reference is a 19x8.5J at ET38, the recommended starting point on a stock or mildly lowered Escape. Our Maximum Aggressive reference is a 20x9.0J at ET35 — past that, expect rubbing under compression without fender rolling or camber correction.
Ford Escape OE Wheel Specs
The 2023 Ford Escape (Crossover) uses a 5*108 bolt pattern with a 63.4mm center bore. Factory wheels are 18x7.5J F/R.
Why the factory spec works for most owners:
- Supports the vehicle's curb weight and load capacity
- Preserves ground clearance for everyday and light off-road use
- Balances ride comfort with cargo and passenger stability
- Maintains clearance for the factory suspension travel and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Ford Escape (2023) we drill the 5x108 pattern and cut the centre bore to 63.4mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- Flush: 19x8.5J ET38 → ~6.25″ backspacing
- Max: 20x9J ET35 → ~6.38″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Ford spec, or want a wheel built to a custom offset for your Ford Escape? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Vehicles With the Same Hub as the Ford Escape (5x108, 63.4 mm Bore)
In our database, 278 other vehicle entries from 17 makes use exactly the same 5x108 bolt pattern and 63.4 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x108 is used by 7.7% of the vehicle pages in our English fitment guide (499 of 6,503); 55.9% of those also use a 63.4 mm center bore.
Hub-Centric Rings for a 63.4 mm Center Bore
A wheel with a center bore larger than 63.4 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 64.1 mm | 64.1 → 63.4 mm |
| 65.1 mm | 65.1 → 63.4 mm |
| 66.1 mm | 66.1 → 63.4 mm |
| 66.6 mm | 66.6 → 63.4 mm |
| 73.1 mm | 73.1 → 63.4 mm |
ANKUSI forged wheels are bored to exactly 63.4 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Ford Escape use?
The 2023 Ford Escape uses a 5x108 bolt pattern.
How many lug bolts does the Ford Escape use?
The Ford Escape uses a 5-lug bolt pattern (5x108), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Ford Escape?
The Ford Escape's center bore is 63.4mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Ford Escape?
Factory wheels on the Ford Escape are 18x7.5J F/R.
What is the biggest wheel size I can fit on my Ford Escape without rubbing?
The most aggressive fitment we recommend without fender work is 20x9.0J at ET35 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Ford Escape?
For a flush look with minimal to no rubbing, we recommend 19x8.5J at ET38 offset as a starting point on a stock or mildly lowered Ford Escape.
Do I need wheel spacers for my Ford Escape?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Ford Escape?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.25" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Ford Escape?
The Ford Escape runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M12x1.5, conical-seat lug nut.
Factory Torque Spec: 136 Nm (100 ft-lb). Covers most Ford passenger cars and crossovers (Fusion, Focus, Escape and similar) on M12x1.5 studs.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 18x7.5 wheels · 18 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.