
BBS LM-Style Gunmetal Mesh Polished Deep Lip Forged Wheels
Deep Dish · Gunmetal
Fitting Dacia Jogger Extreme (UK) wheels? This page gives the 2023 Dacia Jogger Extreme (UK) bolt pattern (4x100), centre bore, factory rim size and the offset range for aftermarket and forged Dacia Jogger Extreme (UK) rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Dacia Jogger Extreme (UK) (2023): 4x100 bolt pattern, 60.1mm center bore. Factory wheels: 16x6.5J F/R. Reference fitment ranges.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 16x6.5J F/R |
| Flush Fitment | 17x7.0J at ET35 offset |
| Maximum Aggressive | 18x7.5J at ET32 offset |
Every design below is forged to order, so it can be machined to the Dacia Jogger Extreme (UK)'s 4x100 bolt pattern and 60.1 mm center bore, with the width and offset calculated for your setup.

Deep Dish · Gunmetal

Monoblock · Gloss White


Monoblock · Gold

2-Piece · Gold

Deep Dish · Gunmetal

Monoblock · Bronze Gold

Monoblock · Gloss White
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.


Wagons split the difference between sedan agility and load-carrying duty, and the wheels have to serve both roles. A forged wheel holds the same structural margin as the factory piece while trimming rotational weight, which benefits both the empty-car handling and the loaded-car ride.
The Dacia Jogger Extreme (UK) runs a 4x100 bolt pattern, 60.1mm center bore, and a 16x6.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 17x7.0J ET35, which tucks the tire under the fender lip on a stock-height Dacia Jogger Extreme (UK). Our Maximum Aggressive reference is 18x7.5J ET32 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
The 2023 Dacia Jogger Extreme (UK) (MPV/Wagon) uses a 4x100 bolt pattern with a 60.1mm center bore. Factory wheels are 16x6.5J F/R.
Why the factory spec works for most owners:
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Dacia Jogger Extreme (UK) (2023) we drill the 4x100 pattern and cut the centre bore to 60.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Dacia spec, or want a wheel built to a custom offset for your Dacia Jogger Extreme (UK)? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.