2013 Citroen C1 Wheels & Rims: Bolt Pattern, Offset & Sizes

Fitting Citroen C1 wheels? This page gives the 2013 Citroen C1 bolt pattern (4x100), centre bore, factory rim size and the offset range for aftermarket and forged Citroen C1 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.

Citroen C1 (2013): 4x100 bolt pattern, 54.1mm center bore. Factory wheels: 14x4.5J F/R. Reference fitment ranges.

Bolt Pattern4x100
Wheel Bolt/NutM12x1.5 Bolt
Center Bore54.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2013
CategoryHatchback

✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify

Use this spec on your site

Paste this code into a forum post, listing or web page to show the Citroen C1 2013 bolt pattern, center bore and factory wheel size. Free, no sign-up.

<iframe src="https://ankusiwheels.com/wp-content/uploads/ankusi-embed/lookup.html?vehicle=citroen-c1-2013&card=1" width="100%" height="230" style="border:0;max-width:560px" loading="lazy" title="Citroen C1 2013 bolt pattern"></iframe>
<p style="font-size:13px"><a href="https://ankusiwheels.com/fitment-guide/citroen-c1-2013/">Citroen C1 2013 bolt pattern and offset guide</a> by ANKUSI Wheels</p>

More free tools: bolt pattern lookup and offset calculator for your website.

Wheel Size & Offset at a Glance

Citroen C1 wheel size and offset comparison by configuration
ConfigurationWheel Size & Offset
Factory (OE)14x4.5J F/R
Flush Fitment15x6.0J at ET30 offset
Maximum Aggressive16x6.5J at ET28 offset

Forged Wheel Designs for the Citroen C1

Every design below is forged to order, so it can be machined to the Citroen C1's 4x100 bolt pattern and 54.1 mm center bore, with the width and offset calculated for your setup.

How to Read Wheel Offset & Measurements

Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.

Diagram showing wheel measurement points: centerline, center bore diameter, PCD, offset, rim width and diameter
Centerline, center bore, PCD, offset, width & diameter
Diagram comparing positive, zero, and negative wheel offset relative to the wheel centerline
Positive vs. zero vs. negative offset

ANKUSI Engineering Expert Advice

On a compact performance platform, every pound of rotational mass fights the car's natural agility. A forged wheel keeps strength at the factory-rated level while cutting that rotational weight, which is where the driving-feel improvement actually comes from.

The Citroen C1 runs a 4x100 bolt pattern, 54.1mm center bore, and a 14x4.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 15x6.0J ET30, which tucks the tire under the fender lip on a stock-height Citroen C1. Our Maximum Aggressive reference is 16x6.5J ET28 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.

Citroen C1 OE Wheel Specs

The 2013 Citroen C1 (Hatchback) uses a 4x100 bolt pattern with a 54.1mm center bore. Factory wheels are 14x4.5J F/R.

Why the factory spec works for most owners:

  • Balances ride comfort with everyday drivability
  • A commonly used size for this vehicle class, supporting parts and tire availability
  • Maintains clearance for the factory suspension and brake components
  • Provides stable, predictable handling across normal driving conditions

ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Citroen C1 (2013) we drill the 4x100 pattern and cut the centre bore to 54.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.

IATF 16949 & ISO 9001 certified · own 10,000-ton press in Guangzhou · from a single set to a full container

Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.

The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.

Offset & Backspacing Reference

Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):

  • OE: 14x4.5J ET39 → ~4.29″ backspacing
  • Flush: 15x6.0J ET30 → ~4.68″ backspacing
  • Max: 16x6.5J ET28 → ~4.85″ backspacing

Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Citroen spec, or want a wheel built to a custom offset for your Citroen C1? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.

Frequently Asked Questions

What bolt pattern (PCD) does the Citroen C1 use?
The 2013 Citroen C1 uses a 4x100 bolt pattern.
How many lug bolts does the Citroen C1 use?
The Citroen C1 uses a 4-lug bolt pattern (4x100), so you need a 4-lug forged wheel to bolt straight on.
What is the center bore size on the Citroen C1?
The Citroen C1's center bore is 54.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Citroen C1?
Factory wheels on the Citroen C1 are 14x4.5J F/R.
What is the biggest wheel size I can fit on my Citroen C1 without rubbing?
The most aggressive fitment we recommend without fender work is 16x6.5J at ET28 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Citroen C1?
For a flush look with minimal to no rubbing, we recommend 15x6.0J at ET30 offset as a starting point on a stock or mildly lowered Citroen C1.
Do I need wheel spacers for my Citroen C1?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Citroen C1?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 4.68" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Citroen C1?
The Citroen C1 runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.

← Back to the full Fitment Guide · Browse forged wheels

Contact WhatsApp Get a Quote