
Citroen OEM-Style Metallic Gray 5-Spoke Forged Wheels
Monoblock · Metallic Gray
Fitting Citroen Grand C4 Picasso wheels? This page gives the 2014 Citroen Grand C4 Picasso bolt pattern (5x108), centre bore, factory rim size and the offset range for aftermarket and forged Citroen Grand C4 Picasso rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Citroen Grand C4 Picasso (2014): 5x108 bolt pattern, 65.1mm center bore. Factory wheels: 17x7.0J F/R. Reference fitment ranges.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 17x7.0J F/R |
| Flush Fitment | 18x8.0J at ET38 offset |
| Maximum Aggressive | 19x8.5J at ET32 offset |
Every design below is forged to order, so it can be machined to the Citroen Grand C4 Picasso's 5x108 bolt pattern and 65.1 mm center bore, with the width and offset calculated for your setup.

Monoblock · Metallic Gray

Monoblock · Gloss Black

Replica · Gold

Monoblock · Gunmetal

Monoblock · Gloss Black

Monoblock · Matte Silver

Monoblock · Satin Black

Replica · Silver
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.


A minivan's wheel spec has to work across a wide load range — empty commute or full family trip. Forged construction preserves the factory's load-rating margin while cutting rotational weight, which keeps ride quality consistent across that range.
The Citroen Grand C4 Picasso runs a 5x108 bolt pattern, 65.1mm center bore, and a 17x7.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 18x8.0J ET38, which tucks the tire under the fender lip on a stock-height Citroen Grand C4 Picasso. Our Maximum Aggressive reference is 19x8.5J ET32 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
The 2014 Citroen Grand C4 Picasso (MPV) uses a 5x108 bolt pattern with a 65.1mm center bore. Factory wheels are 17x7.0J F/R.
Why the factory spec works for most owners:
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Citroen Grand C4 Picasso (2014) we drill the 5x108 pattern and cut the centre bore to 65.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Citroen spec, or want a wheel built to a custom offset for your Citroen Grand C4 Picasso? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.