2024 Citroen e-Berlingo Wheels & Rims: Bolt Pattern, Offset & Sizes

Fitting Citroen e-Berlingo wheels? This page gives the 2024 Citroen e-Berlingo bolt pattern (5x108), centre bore, factory rim size and the offset range for aftermarket and forged Citroen e-Berlingo rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.

Citroen e-Berlingo (2024): 5x108 bolt pattern, 65.1mm center bore. Factory wheels: 16x6.5J F/R. Reference fitment ranges.

Bolt Pattern5x108
Wheel Bolt/NutM12x1.25 Bolt
Center Bore65.1mm
Wheel Load Rating1035–1265 kg/wheel (Van / MPV segment reference)
Year2024
CategoryEV MPV

Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify

Use this spec on your site

Paste this code into a forum post, listing or web page to show the Citroen e-Berlingo 2024 bolt pattern, center bore and factory wheel size. Free, no sign-up.

<iframe src="https://ankusiwheels.com/wp-content/uploads/ankusi-embed/lookup.html?vehicle=citroen-e-berlingo-2024&card=1" width="100%" height="230" style="border:0;max-width:560px" loading="lazy" title="Citroen e-Berlingo 2024 bolt pattern"></iframe>
<p style="font-size:13px"><a href="https://ankusiwheels.com/fitment-guide/citroen-e-berlingo-2024/">Citroen e-Berlingo 2024 bolt pattern and offset guide</a> by ANKUSI Wheels</p>

More free tools: bolt pattern lookup and offset calculator for your website.

Wheel Size & Offset at a Glance

Citroen e-Berlingo wheel size and offset comparison by configuration
ConfigurationWheel Size & Offset
Factory (OE)16x6.5J F/R
Flush Fitment18x8.0J at ET38 offset
Maximum Aggressive19x8.5J at ET35 offset

Forged Wheel Designs for the Citroen e-Berlingo

Every design below is forged to order, so it can be machined to the Citroen e-Berlingo's 5x108 bolt pattern and 65.1 mm center bore, with the width and offset calculated for your setup.

How to Read Wheel Offset & Measurements

Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.

Diagram showing wheel measurement points: centerline, center bore diameter, PCD, offset, rim width and diameter
Centerline, center bore, PCD, offset, width & diameter
Diagram comparing positive, zero, and negative wheel offset relative to the wheel centerline
Positive vs. zero vs. negative offset

ANKUSI Engineering Expert Advice

A minivan's wheel spec has to work across a wide load range — empty commute or full family trip. Forged construction preserves the factory's load-rating margin while cutting rotational weight, which keeps ride quality consistent across that range.

The Citroen e-Berlingo runs a 5x108 bolt pattern, 65.1mm center bore, and a 16x6.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 18x8.0J ET38, which tucks the tire under the fender lip on a stock-height Citroen e-Berlingo. Our Maximum Aggressive reference is 19x8.5J ET35 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.

Citroen e-Berlingo OE Wheel Specs

The 2024 Citroen e-Berlingo (EV MPV) uses a 5x108 bolt pattern with a 65.1mm center bore. Factory wheels are 16x6.5J F/R.

Why the factory spec works for most owners:

  • Keeps the factory ride quality and noise levels intact
  • A common fitment for this class, so replacement tires are easy to source
  • Preserves clearance around the OE brakes and suspension geometry
  • Delivers predictable, easy-to-live-with handling for daily use

ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Citroen e-Berlingo (2024) we drill the 5x108 pattern and cut the centre bore to 65.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.

IATF 16949 & ISO 9001 certified · own 10,000-ton press in Guangzhou · from a single set to a full container

Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.

The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.

Offset & Backspacing Reference

Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):

  • OE: 16x6.5J ET47 → ~5.6″ backspacing
  • Flush: 18x8.0J ET38 → ~6″ backspacing
  • Max: 19x8.5J ET35 → ~6.13″ backspacing

Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Citroen spec, or want a wheel built to a custom offset for your Citroen e-Berlingo? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.

Frequently Asked Questions

What bolt pattern (PCD) does the Citroen e-Berlingo use?
The 2024 Citroen e-Berlingo uses a 5x108 bolt pattern.
How many lug bolts does the Citroen e-Berlingo use?
The Citroen e-Berlingo uses a 5-lug bolt pattern (5x108), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Citroen e-Berlingo?
The Citroen e-Berlingo's center bore is 65.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Citroen e-Berlingo?
Factory wheels on the Citroen e-Berlingo are 16x6.5J F/R.
What is the biggest wheel size I can fit on my Citroen e-Berlingo without rubbing?
The most aggressive fitment we recommend without fender work is 19x8.5J at ET35 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Citroen e-Berlingo?
For a flush look with minimal to no rubbing, we recommend 18x8.0J at ET38 offset as a starting point on a stock or mildly lowered Citroen e-Berlingo.
Do I need wheel spacers for my Citroen e-Berlingo?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Citroen e-Berlingo?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Citroen e-Berlingo?
The Citroen e-Berlingo runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.

← Back to the full Fitment Guide · Browse forged wheels

Contact WhatsApp Get a Quote