Dodge Dakota Bolt Pattern, Center Bore & Wheel Offset (2001–2008)
Dodge Dakota wheel fitment: 5x139.7 bolt pattern, 77.8mm center bore (2005–2008); 6x114.3 bolt pattern, 71.6mm center bore. OE wheel sizes and offsets for eve
- 5x139.7bolt pattern (PCD), most common
- 77.8 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 3 guidesmodel years 2001–2008
Bolt pattern by generation
- 5x139.7, 77.8 mm center bore — 2005–2008 (2 variants)
- 6x114.3, 71.6 mm center bore — 2001 (1 variants)
Dodge Dakota wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2008 | Dodge Dakota | 5x139.7 | 77.8 mm | 16x7.0J |
| 2005 | Dodge Dakota | 5x139.7 | 77.8 mm | 16x7.0J |
| 2001 | Dodge Dakota | 6x114.3 | 71.6 mm | 15x7.0J |
Forged wheels for the Dodge Dakota (5x139.7)
Get a quote for Dodge Dakota wheels
FAQ
What is the bolt pattern on a Dodge Dakota?
The Dodge Dakota uses a 5x139.7 bolt pattern on most variants we cover with a 77.8mm center bore. Other generations use 6x114.3 / 71.6mm (2001–2001). Always check the exact year and trim before ordering.
What is the Dodge Dakota center bore?
The hub-centric center bore is 77.8 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Dodge Dakota years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Dodge Dakota?
Any wheel drilled 5x139.7 with a 77.8mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.