Audi Q7 Bolt Pattern, Center Bore & Wheel Offset (2009–2027)
Audi Q7 wheel fitment: 5x112 bolt pattern, 66.5mm center bore (2017–2027); 5x130 bolt pattern, 71.6mm center bore. OE wheel sizes and offsets for every Q7 var
- 5x112bolt pattern (PCD), most common
- 66.5 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 7 guidesmodel years 2009–2027
Bolt pattern by generation
- 5x112, 66.5 mm center bore — 2017–2027 (6 variants)
- 5x130, 71.6 mm center bore — 2009 (1 variants)
Audi Q7 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2027 | Audi Q7 | 5x112 | 66.5 mm | 20x9.0J |
| 2025 | Audi Q7 [US] | 5x112 | 66.5 mm | 21x9.5J ET30 |
| 2024 | Audi Q7 TFSI e quattro | 5x112 | 66.5 mm | 20x9.0J ET30 |
| 2022 | Audi Q7 competition plus | 5x112 | 66.5 mm | 21x9.5J ET30 |
| 2017 | Audi Q7 e-tron 2.0 TFSI quattro | 5x112 | 66.5 mm | 20x9.0J ET30 |
| 2017 | Audi Q7 e-tron 3.0 TDI quattro | 5x112 | 66.5 mm | 20x9.0J ET30 |
| 2009 | Audi Q7 V12 TDI | 5x130 | 71.6 mm | 21x10.0J ET60 |
Factory wheel sizes on the Audi Q7
Across the 7 Audi Q7 trims with a documented factory wheel, the OE diameter is 20-21 inch, width 9-10J and offset ET30-60. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and stays inside that offset range bolts on without spacers or hub rings. The offset spread between trims is 30 mm, so read the year-by-year row for your exact car before choosing a width. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Audi Q7 (5x112)
Shop all Audi Q7 forged wheels →
Get a quote for Audi Q7 wheels
Vehicles With the Same Hub as the Audi Q7 (5x112, 66.5 mm Bore)
In our database, 23 other vehicle entries from 5 makes use exactly the same 5x112 bolt pattern and 66.5 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.6% of the vehicle pages in our English fitment guide (1,407 of 6,503); 11.9% of those also use a 66.5 mm center bore.
Hub-Centric Rings for a 66.5 mm Center Bore
A wheel with a center bore larger than 66.5 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.6 mm | 66.6 → 66.5 mm |
| 67.1 mm | 67.1 → 66.5 mm |
| 70.1 mm | 70.1 → 66.5 mm |
| 70.5 mm | 70.5 → 66.5 mm |
| 73.1 mm | 73.1 → 66.5 mm |
ANKUSI forged wheels are bored to exactly 66.5 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Audi Q7?
The Audi Q7 uses a 5x112 bolt pattern on most variants we cover with a 66.5mm center bore. Other generations use 5x130 / 71.6mm (2009–2009). Always check the exact year and trim before ordering.
What is the Audi Q7 center bore?
The hub-centric center bore is 66.5 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Audi Q7 years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Audi Q7?
Any wheel drilled 5x112 with a 66.5mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.