Nissan Pathfinder Bolt Pattern, Center Bore & Wheel Offset (2008–2026)
Nissan Pathfinder wheel fitment: 5x114.3 bolt pattern, 66.1mm center bore (2013–2026); 6x114.3 bolt pattern, 66.1mm center bore (2008–2010). OE wheel sizes an
- 5x114.3bolt pattern (PCD), most common
- 66.1 mmcenter bore
- M12x1.25 Nutwheel bolt / nut
- 7 guidesmodel years 2008–2026
Bolt pattern by generation
- 5x114.3, 66.1 mm center bore — 2013–2026 (5 variants)
- 6x114.3, 66.1 mm center bore — 2008–2010 (2 variants)
Nissan Pathfinder wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2026 | Nissan Pathfinder | 5x114.3 | 66.1 mm | 20x8.0J ET35 |
| 2022 | Nissan Pathfinder | 5x114.3 | 66.1 mm | 20x8.0J |
| 2017 | Nissan Pathfinder | 5x114.3 | 66.1 mm | 20x7.5J |
| 2014 | Nissan Pathfinder Hybrid | 5x114.3 | 66.1 mm | 20x7.5J |
| 2013 | Nissan Pathfinder | 5x114.3 | 66.1 mm | 20x7.5J |
| 2010 | Nissan Pathfinder | 6x114.3 | 66.1 mm | 18x8.0J |
| 2008 | Nissan Pathfinder | 6x114.3 | 66.1 mm | 17x7.5J |
Forged wheels for the Nissan Pathfinder (5x114.3)
Get a quote for Nissan Pathfinder wheels
FAQ
What is the bolt pattern on a Nissan Pathfinder?
The Nissan Pathfinder uses a 5x114.3 bolt pattern on most variants we cover with a 66.1mm center bore. Other generations use 6x114.3 / 66.1mm (2008–2010). Always check the exact year and trim before ordering.
What is the Nissan Pathfinder center bore?
The hub-centric center bore is 66.1 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Nissan Pathfinder years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Nissan Pathfinder?
Any wheel drilled 5x114.3 with a 66.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.