Corvette OEM-Style Gloss Black 5 Y-Spoke Concave Forged Wheels
Concave · Gloss Black
2016 Chevrolet Volt Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Chevrolet Volt wheels? This page gives the 2016 Chevrolet Volt bolt pattern (5x105), centre bore, factory rim size and the offset range for aftermarket and forged Chevrolet Volt rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Forged wheels for Chevrolet Volt — styles, sizes & factory quote →
Chevrolet Volt (2016): 5x105 bolt pattern, 56.6mm center bore. Factory wheels: 17x7.0J at ET44 offset, front and rear. Reference fitment ranges.
Bolt Pattern5x105
Wheel Bolt/NutM12x1.5 Nut
Center Bore56.6mm
Wheel Load Rating748–863 kg/wheel (Standard Passenger Car segment reference)
Year2016
CategoryPHEV Hatch
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 17x7.0J F/R |
| Flush Fitment | 18x8.0J at ET35 offset |
| Maximum Aggressive | 19x8.5J at ET32 offset |
Forged Wheel Designs for the Chevrolet Volt
Every design below is forged to order, so it can be machined to the Chevrolet Volt's 5x105 bolt pattern and 56.6 mm center bore, with the width and offset calculated for your setup.
Weld Matte Silver Deep Lip Forged Drag Racing Wheels
Drag Racing · Matte Silver
Corvette OEM-Style Gloss Black / Carbon Fiber 5-Spoke 2-Piece Forged Wheels
Carbon Fiber · Gloss Black / Carbon Fiber
Chevrolet OEM-Style Gloss Black Y-Spoke Mesh 2-Piece Polished Deep Lip Forged Wheels
2-Piece · Gloss Black
Boyd Racing-Style Gloss Black / Mirror Milled 5-Spoke Forged Wheels
Monoblock · Gloss Black / Mirror Milled
Mirror Polished 5-Spoke 3-Piece Forged Wheels
Monoblock · Mirror Polished
Weld Racing-Style Black Machined Mesh Polished Deep Lip Forged Drag Racing Wheels
Drag Racing · Black Machined
Weld Racing-Style Gloss Black / Mirror Milled Multi-Spoke Forged Drag Racing Wheels
Drag Racing · Gloss Black / Mirror Milled
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
On a compact performance platform, every pound of rotational mass fights the car's natural agility. A forged wheel keeps strength at the factory-rated level while cutting that rotational weight, which is where the driving-feel improvement actually comes from.
The Chevrolet Volt runs a 5x105 bolt pattern, 56.6mm center bore, and a 17x7.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 18x8.0J ET35, which tucks the tire under the fender lip on a stock-height Chevrolet Volt. Our Maximum Aggressive reference is 19x8.5J ET32 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Chevrolet Volt OE Wheel Specs
The 2016 Chevrolet Volt (PHEV Hatch) uses a 5x105 bolt pattern with a 56.6mm center bore. Factory wheels are 17x7.0J F/R.
Why the factory spec works for most owners:
- Balances ride comfort with everyday drivability
- A commonly used size for this vehicle class, supporting parts and tire availability
- Maintains clearance for the factory suspension and brake components
- Provides stable, predictable handling across normal driving conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Chevrolet Volt (2016) we drill the 5x105 pattern and cut the centre bore to 56.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 17x7.0J ET44 → ~5.73″ backspacing
- Flush: 18x8.0J ET35 → ~5.88″ backspacing
- Max: 19x8.5J ET32 → ~6.01″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Chevrolet spec, or want a wheel built to a custom offset for your Chevrolet Volt? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Chevrolet Volt use?
The 2016 Chevrolet Volt uses a 5x105 bolt pattern.
How many lug bolts does the Chevrolet Volt use?
The Chevrolet Volt uses a 5-lug bolt pattern (5x105), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Chevrolet Volt?
The Chevrolet Volt's center bore is 56.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Chevrolet Volt?
Factory wheels on the Chevrolet Volt are 17x7.0J F/R.
What is the biggest wheel size I can fit on my Chevrolet Volt without rubbing?
The most aggressive fitment we recommend without fender work is 19x8.5J at ET32 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Chevrolet Volt?
For a flush look with minimal to no rubbing, we recommend 18x8.0J at ET35 offset as a starting point on a stock or mildly lowered Chevrolet Volt.
Do I need wheel spacers for my Chevrolet Volt?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Chevrolet Volt?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.88" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Chevrolet Volt?
The Chevrolet Volt runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M12x1.5, conical-seat lug nut.
Factory Torque Spec: 136 Nm (100 ft-lb). Covers most Chevrolet passenger cars and crossovers on M12 studs.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.