Mini OEM-Style Gloss Black 10-Spoke Forged Wheels
Monoblock · Gloss Black
2024 Mini John Cooper Works Countryman ALL4 Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Mini John Cooper Works Countryman ALL4 wheels? This page gives the 2024 Mini John Cooper Works Countryman ALL4 bolt pattern (5x112), centre bore, factory rim size and the offset range for aftermarket and forged Mini John Cooper Works Countryman ALL4 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2024 Mini John Cooper Works Countryman ALL4 uses a 5x112 bolt pattern with a 66.6 mm centre bore and M14x1.25 lug bolts. Factory wheels: 19x8J at ET46. For aftermarket wheels, 20x9J ET35 sits flush and 21x9.5J ET30 is the most aggressive fit.
Forged wheels for the 2024 Mini John Cooper Works Countryman ALL4 — drilled 5x112 with a 66.6 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Mini John Cooper Works Countryman ALL4 (2024): 5x112 bolt pattern, 66.6mm center bore. Factory wheels: 19x8J. Reference fitment ranges.
Bolt Pattern5x112
Wheel Bolt/NutM14x1.25 Bolt
Center Bore66.6mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2024
CategoryPerformance SUV
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 19x8J at ET46 |
| Flush Fitment | 20x9J at ET35 offset |
| Maximum Aggressive | 21x9.5J at ET30 offset |
Forged Wheel Designs for the Mini John Cooper Works Countryman ALL4
Every design below is forged to order, so it can be machined to the Mini John Cooper Works Countryman ALL4's 5x112 bolt pattern and 66.6 mm center bore, with the width and offset calculated for your setup.
Mini OEM-Style Gloss Black Directional Machined Face Forged Wheels
Monoblock · Gloss Black
Vossen-Style Black Chrome Multi-Spoke Bolt-Ring Forged Wheels
2-Piece · Black Chrome
APEX-Style Silver Mesh Deep Dish Forged Wheels
Deep Dish · Silver
Mini OEM-Style Bronze Deep Lip Forged Wheels
Deep Dish · Bronze
Mini OEM-Style Brushed Silver 10-Spoke Forged Wheels
Monoblock · Matte Silver
Carbon / Silver 5 Y-Spoke Carbon Fibre Forged Wheels
Carbon Fiber · Carbon / Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Because an SUV's center of gravity is already higher than a sedan's, anything added at the corners — including wheel weight — has an outsized effect on handling balance. A forged wheel lets us hit the visual stance owners want without adding the rotational mass a cast wheel of the same strength would carry.
The Mini John Cooper Works Countryman ALL4 runs a 5x112 bolt pattern, 66.6mm center bore, and a 19x8J at ET46, front and rear, wheel from the factory. Our Flush Fitment reference is 20x9J ET35, which tucks the tire under the fender lip on a stock-height Mini John Cooper Works Countryman ALL4. Our Maximum Aggressive reference is 21x9.5J ET30 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Mini John Cooper Works Countryman ALL4 OE Wheel Specs
The 2024 Mini John Cooper Works Countryman ALL4 (Performance SUV) uses a 5x112 bolt pattern with a 66.6mm center bore. Factory wheels are 19x8J at ET46.
Why the factory spec works for most owners:
- Supports the vehicle's curb weight and load capacity
- Preserves ground clearance for everyday and light off-road use
- Balances ride comfort with cargo and passenger stability
- Maintains clearance for the factory suspension travel and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Mini John Cooper Works Countryman ALL4 (2024) we drill the 5x112 pattern and cut the centre bore to 66.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Real-World Fitment Notes
KW V3 coilovers; 20x9.0J ET35 BBS CH-R wheels; Brembo 4-piston front brakes; Michelin Pilot Sport 4S 245/40 R20 tires. Note: Larger U25 generation performance SUV pushing 312 hp with all-wheel drive.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 19x8J ET46 → ~6.31″ backspacing
- Flush: 20x9J ET35 → ~6.38″ backspacing
- Max: 21x9.5J ET30 → ~6.43″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Mini spec, or want a wheel built to a custom offset for your Mini John Cooper Works Countryman ALL4? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Vehicles With the Same Hub as the Mini John Cooper Works Countryman ALL4 (5x112, 66.6 mm Bore)
In our database, 823 other vehicle entries from 21 makes use exactly the same 5x112 bolt pattern and 66.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.6% of the vehicle pages in our English fitment guide (1,407 of 6,503); 58.6% of those also use a 66.6 mm center bore.
Hub-Centric Rings for a 66.6 mm Center Bore
A wheel with a center bore larger than 66.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 67.1 mm | 67.1 → 66.6 mm |
| 70.1 mm | 70.1 → 66.6 mm |
| 70.5 mm | 70.5 → 66.6 mm |
| 71.6 mm | 71.6 → 66.6 mm |
| 73.1 mm | 73.1 → 66.6 mm |
ANKUSI forged wheels are bored to exactly 66.6 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Mini John Cooper Works Countryman ALL4 use?
The 2024 Mini John Cooper Works Countryman ALL4 uses a 5x112 bolt pattern.
How many lug bolts does the Mini John Cooper Works Countryman ALL4 use?
The Mini John Cooper Works Countryman ALL4 uses a 5-lug bolt pattern (5x112), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Mini John Cooper Works Countryman ALL4?
The Mini John Cooper Works Countryman ALL4's center bore is 66.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Mini John Cooper Works Countryman ALL4?
Factory wheels on the Mini John Cooper Works Countryman ALL4 are 19x8J at ET46.
What is the biggest wheel size I can fit on my Mini John Cooper Works Countryman ALL4 without rubbing?
The most aggressive fitment we recommend without fender work is 21x9.5J at ET30 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Mini John Cooper Works Countryman ALL4?
For a flush look with minimal to no rubbing, we recommend 20x9J at ET35 offset as a starting point on a stock or mildly lowered Mini John Cooper Works Countryman ALL4.
Do I need wheel spacers for my Mini John Cooper Works Countryman ALL4?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Mini John Cooper Works Countryman ALL4?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.38" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Mini John Cooper Works Countryman ALL4?
The Mini John Cooper Works Countryman ALL4 runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x8 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.