Black / Machined Turbine Forged Wheels
Monoblock · Black Machined
2002 Hamann Mercedes-Benz M-Klasse Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Hamann Mercedes-Benz M-Klasse wheels? This page gives the 2002 Hamann Mercedes-Benz M-Klasse bolt pattern (5x112), centre bore, factory rim size and the offset range for aftermarket and forged Hamann Mercedes-Benz M-Klasse rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2002 Hamann Mercedes-Benz M-Klasse uses a 5x112 bolt pattern with a 66.6 mm centre bore and M14x1.5 lug bolts. Factory wheels: 16x8J ET47. For aftermarket wheels, 20x9.5J ET35 sits flush.
Forged wheels for the 2002 Hamann Mercedes-Benz M-Klasse — drilled 5x112 with a 66.6 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Hamann Mercedes-Benz M-Klasse (2002): 5x112 bolt pattern, 66.6mm center bore, OE 16x8J ET47. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x112
Wheel Bolt/NutM14x1.5 Bolt
Center Bore66.6mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2002
Category5-Lug Large Sedan/SUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 16x8J ET47 |
| Flush Fitment | 20x9.5J at ET35 offset |
Forged Wheel Designs for the Hamann Mercedes-Benz M-Klasse
Every design below is forged to order, so it can be machined to the Hamann Mercedes-Benz M-Klasse's 5x112 bolt pattern and 66.6 mm center bore, with the width and offset calculated for your setup.
AM FORGED Brushed Transparent Gray 10-Spoke Y-Design Forged Wheels
Concave · Brushed Transparent Gray
Gunmetal Petal Forged Wheels
Monoblock · Gunmetal
Beige / Black Two-Tone 5-Spoke Forged Wheels
Monoblock · Beige And Black Two-tone
Zauher-Style Brushed 5-Spoke Dish 2-Piece Riveted Forged Wheels
2-Piece · Brushed Silver / Polished Lip
Wheelforce-Style Brushed Silver 10 Directional-Spoke Forged Wheels
Replica · Brushed Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Because an SUV's center of gravity is already higher than a sedan's, anything added at the corners — including wheel weight — has an outsized effect on handling balance. A forged wheel lets us hit the visual stance owners want without adding the rotational mass a cast wheel of the same strength would carry.
The Hamann Mercedes-Benz M-Klasse ships from the factory on a 5x112 bolt pattern with a 66.6mm center bore and a 16x8J ET47 wheel. Our flush reference for the Hamann Mercedes-Benz M-Klasse is 20x9.5J ET35.; our maximum aggressive reference is 22x10J ET30. — beyond that, expect clearance issues against the fender liner without further modification.
Hamann Mercedes-Benz M-Klasse OE Wheel Specs
The Hamann Mercedes-Benz M-Klasse ships from the factory on 5x112 bolt pattern wheels with a 66.6mm center bore. The stock wheel size is 16x8J ET47, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Hamann Mercedes-Benz M-Klasse (2002) we drill the 5x112 pattern and cut the centre bore to 66.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 16x8J | ET47 | 6.35 in (161 mm) | — | — |
| Flush | 20x9.5J | ET35 | 6.63 in (168 mm) | +7 mm | +31 mm |
| Maximum | 22x10J | ET30 | 6.68 in (170 mm) | +8 mm | +42 mm |
Vehicles With the Same Hub as the Hamann Mercedes-Benz M-Klasse (5x112, 66.6 mm Bore)
In our database, 823 other vehicle entries from 21 makes use exactly the same 5x112 bolt pattern and 66.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.6% of the vehicle pages in our English fitment guide (1,407 of 6,503); 58.6% of those also use a 66.6 mm center bore.
Hub-Centric Rings for a 66.6 mm Center Bore
A wheel with a center bore larger than 66.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 67.1 mm | 67.1 → 66.6 mm |
| 70.1 mm | 70.1 → 66.6 mm |
| 70.5 mm | 70.5 → 66.6 mm |
| 71.6 mm | 71.6 → 66.6 mm |
| 73.1 mm | 73.1 → 66.6 mm |
ANKUSI forged wheels are bored to exactly 66.6 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Hamann Mercedes-Benz M-Klasse use?
The 2002 Hamann Mercedes-Benz M-Klasse uses a 5x112 bolt pattern.
How many lug bolts does the Hamann Mercedes-Benz M-Klasse use?
The Hamann Mercedes-Benz M-Klasse uses a 5-lug bolt pattern (5x112), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Hamann Mercedes-Benz M-Klasse?
The Hamann Mercedes-Benz M-Klasse's center bore is 66.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Hamann Mercedes-Benz M-Klasse?
Factory wheels on the Hamann Mercedes-Benz M-Klasse are 16x8J ET47.
What does a flush wheel fitment look like on the Hamann Mercedes-Benz M-Klasse?
For a flush look with minimal to no rubbing, we recommend 20x9.5J at ET35 offset as a starting point on a stock or mildly lowered Hamann Mercedes-Benz M-Klasse.
Do I need wheel spacers for my Hamann Mercedes-Benz M-Klasse?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Hamann Mercedes-Benz M-Klasse?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.63" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Hamann Mercedes-Benz M-Klasse?
The Hamann Mercedes-Benz M-Klasse runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 16x8 wheels · 16 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.