2004 Startech Chrysler Crossfire Roadster Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Startech Chrysler Crossfire Roadster wheels? This page gives the 2004 Startech Chrysler Crossfire Roadster bolt pattern (5x112), centre bore, factory rim size and the offset range for aftermarket and forged Startech Chrysler Crossfire Roadster rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2004 Startech Chrysler Crossfire Roadster uses a 5x112 bolt pattern with a 66.6 mm centre bore and M12x1.5 lug nuts. For aftermarket wheels, 19x9J ET30 front / 20x10J ET15 rear sits flush.
Forged wheels for the 2004 Startech Chrysler Crossfire Roadster — drilled 5x112 with a 66.6 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Startech Chrysler Crossfire Roadster (2004): 5x112 bolt pattern, 66.6mm center bore, OE F 19x8.5J ET35 / R 20x9J ET22. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x112
Wheel Bolt/NutM12x1.5 Nut
Center Bore66.6mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Year2004
Category5-Lug Performance / Tuner
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 19x9J ET30 / R 20x10J ET15 |
Forged Wheel Designs for the Startech Chrysler Crossfire Roadster
Every design below is forged to order, so it can be machined to the Startech Chrysler Crossfire Roadster's 5x112 bolt pattern and 66.6 mm center bore, with the width and offset calculated for your setup.
Matte Black 3-Spoke Disc Forged Wheels
Monoblock · Matte Black
Matte Gold 5 Y-Spoke Forged Wheels
Monoblock · Matte Gold
Gloss Black 10-Spoke Forged Wheels
Monoblock · Gloss Black
Black / Machined 10-Spoke Machined Face Forged Wheels
Monoblock · Black Machined
Brabus-Style Monoblock Z Gloss Black Multi-Spoke Forged Wheels
Replica · Gloss Black
Gloss Black / Silver 2-Piece Carbon Fibre Forged Wheels
Carbon Fiber · Gloss Black / Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Convertibles lose some of the structural rigidity a fixed roof provides, which means the suspension and wheels end up doing more of the work to keep the chassis composed. A forged wheel keeps unsprung mass down without sacrificing the strength margin the factory built in — useful on a platform that's already managing extra flex.
The Startech Chrysler Crossfire Roadster ships from the factory on a 5x112 bolt pattern with a 66.6mm center bore and a F 19x8.5J ET35 / R 20x9J ET22 wheel. Our flush reference for the Startech Chrysler Crossfire Roadster is F 19x9J ET30 / R 20x10J ET15.; our maximum aggressive reference is F 19x9.5J ET25 / R 20x10.5J ET10. — beyond that, expect clearance issues against the fender liner without further modification.
Startech Chrysler Crossfire Roadster OE Wheel Specs
The Startech Chrysler Crossfire Roadster ships from the factory on 5x112 bolt pattern wheels with a 66.6mm center bore. The stock wheel size is F 19x8.5J ET35 / R 20x9J ET22, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Startech Chrysler Crossfire Roadster (2004) we drill the 5x112 pattern and cut the centre bore to 66.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x8.5J | ET35 | 6.13 in (156 mm) | — | — |
| Flush | 19x9J | ET30 | 6.18 in (157 mm) | +1 mm | +11 mm |
| Maximum | 19x9.5J | ET25 | 6.23 in (158 mm) | +3 mm | +23 mm |
Vehicles With the Same Hub as the Startech Chrysler Crossfire Roadster (5x112, 66.6 mm Bore)
In our database, 823 other vehicle entries from 20 makes use exactly the same 5x112 bolt pattern and 66.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.6% of the vehicle pages in our English fitment guide (1,407 of 6,503); 58.6% of those also use a 66.6 mm center bore.
Hub-Centric Rings for a 66.6 mm Center Bore
A wheel with a center bore larger than 66.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 67.1 mm | 67.1 → 66.6 mm |
| 70.1 mm | 70.1 → 66.6 mm |
| 70.5 mm | 70.5 → 66.6 mm |
| 71.6 mm | 71.6 → 66.6 mm |
| 73.1 mm | 73.1 → 66.6 mm |
ANKUSI forged wheels are bored to exactly 66.6 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Startech Chrysler Crossfire Roadster use?
The 2004 Startech Chrysler Crossfire Roadster uses a 5x112 bolt pattern.
How many lug bolts does the Startech Chrysler Crossfire Roadster use?
The Startech Chrysler Crossfire Roadster uses a 5-lug bolt pattern (5x112), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Startech Chrysler Crossfire Roadster?
The Startech Chrysler Crossfire Roadster's center bore is 66.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What does a flush wheel fitment look like on the Startech Chrysler Crossfire Roadster?
For a flush look with minimal to no rubbing, we recommend F 19x9J ET30 / R 20x10J ET15 as a starting point on a stock or mildly lowered Startech Chrysler Crossfire Roadster.
Do I need wheel spacers for my Startech Chrysler Crossfire Roadster?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Startech Chrysler Crossfire Roadster?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.18" backspacing up front and 6.09" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Startech Chrysler Crossfire Roadster?
Yes — the Startech Chrysler Crossfire Roadster's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x8.5 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.