Gloss Black 10 Split-Spoke Beadlock Forged Wheels
Off-Road Beadlock · Matte Black
2025 Ford Ranger Plug-in Hybrid Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Ford Ranger Plug-in Hybrid wheels? This page gives the 2025 Ford Ranger Plug-in Hybrid bolt pattern (6x139.7), centre bore, factory rim size and the offset range for aftermarket and forged Ford Ranger Plug-in Hybrid rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2025 Ford Ranger Plug-in Hybrid uses a 6x139.7 bolt pattern with a 93.1 mm centre bore. Factory wheels: 18x7.5J at ET55, front and rear. For aftermarket wheels, 18x8.5J ET30 sits flush and 20x9.0J ET25 is the most aggressive fit.
Forged wheels for the 2025 Ford Ranger Plug-in Hybrid — drilled 6x139.7 with a 93.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Ford Ranger Plug-in Hybrid (2025): 6x139.7 bolt pattern, 93.1mm center bore. Factory wheels: 18x7.5J at ET55 offset, front and rear.
Bolt Pattern6x139.7
Wheel Bolt/Nut1/2\"x20 Nut
Center Bore93.1mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2025
Category6-Lug Off-Road (Standard Road)
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 25, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 18x7.5J at ET55 offset, front and rear |
| Flush Fitment | 18x8.5J at ET30 offset |
| Maximum Aggressive | 20x9.0J at ET25 offset |
Forged Wheel Designs for the Ford Ranger Plug-in Hybrid
Every design below is forged to order, so it can be machined to the Ford Ranger Plug-in Hybrid's 6x139.7 bolt pattern and 93.1 mm center bore, with the width and offset calculated for your setup.
Gloss Black 10-Window Forged Wheels
Off-Road · Matte Black
Braid-Style Gloss Black 15-Spoke Off-Road Forged Wheels
Off-Road · Gloss Black
KMC-Style Matte Black 6-Spoke Semi-Full-Face Exposed Bolt Detail Off-Road Forged Wheels
Off-Road · Matte Black
Matte Black 6 Y-Spoke Forged Wheels
Off-Road · Matte Black
KMC Wheels Matte Black 16-Spoke Exposed Bolt Detail Off-Road Forged Wheels
Off-Road · Matte Black
Gloss Black 16-Hole Forged Wheels
Off-Road · Gloss Black
Fuel-Style Gloss Red Split-Spoke Bolt-Ring Off-Road Forged Wheels
Off-Road · Gloss Red
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A sedan's wheel spec is a balance point the factory tuned between ride comfort, steering feel, and everyday durability. Forging lets us hold that same structural margin while cutting rotational mass, which is where most of the real-world benefit — quicker steering response, marginally better ride — actually comes from.
The Ford Ranger Plug-in Hybrid runs a 6x139.7 bolt pattern, 93.1mm center bore, and a 18x7.5J at ET55, front and rear, wheel from the factory. Our Flush Fitment reference is 18x8.5J, which tucks the tire under the fender lip on a stock-height Ford Ranger Plug-in Hybrid. Our Maximum Aggressive reference is 20x9.0J at ET25 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Ford Ranger Plug-in Hybrid OE Wheel Specs
The 2025 Ford Ranger Plug-in Hybrid (Pickup) uses a 6x139.7 bolt pattern with a 93.1mm center bore. Factory wheels are 18x7.5J at ET55 offset, front and rear.
Why the factory spec works for most owners:
- Balances ride comfort with everyday drivability
- A commonly used size for this vehicle class, supporting parts and tire availability
- Maintains clearance for the factory suspension and brake components
- Provides stable, predictable handling across normal driving conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Ford Ranger Plug-in Hybrid (2025) we drill the 6x139.7 pattern and cut the centre bore to 93.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Flush Fitment
For a flush look, a 18x8.5J wheel at ET30 offset (front and rear) is a commonly used starting point — clearance must be verified on a stock or mildly lowered Ford Ranger Plug-in Hybrid.
Maximum Aggressive Fitment
20x9.0J at ET25 offset is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 18x7.5J ET55 → ~6.42" backspacing
- Flush: 18x8.5J ET30 → ~5.93" backspacing
- Max: 20x9.0J ET25 → ~5.98" backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or can't find your exact Ford spec, or want a wheel built to a custom offset for your Ford Ranger Plug-in Hybrid? Contact ANKUSI with your bolt pattern and offset target and we'll confirm the correct forged wheel spec for your build.
Vehicles With the Same Hub as the Ford Ranger Plug-in Hybrid (6x139.7, 93.1 mm Bore)
In our database, 30 other vehicle entries from 4 makes use exactly the same 6x139.7 bolt pattern and 93.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x139.7 is used by 4.0% of the vehicle pages in our English fitment guide (258 of 6,503); 12.0% of those also use a 93.1 mm center bore.
Hub-Centric Rings for a 93.1 mm Center Bore
A wheel with a center bore larger than 93.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 100.1 mm | 100.1 → 93.1 mm |
| 106.1 mm | 106.1 → 93.1 mm |
| 108.1 mm | 108.1 → 93.1 mm |
| 110.1 mm | 110.1 → 93.1 mm |
ANKUSI forged wheels are bored to exactly 93.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Ford Ranger Plug-in Hybrid use?
The 2025 Ford Ranger Plug-in Hybrid uses a 6x139.7 bolt pattern.
How many lug bolts does the Ford Ranger Plug-in Hybrid use?
The Ford Ranger Plug-in Hybrid uses a 6-lug bolt pattern (6x139.7), so you need a 6-lug forged wheel to bolt straight on.
What is the center bore size on the Ford Ranger Plug-in Hybrid?
The Ford Ranger Plug-in Hybrid's center bore is 93.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Ford Ranger Plug-in Hybrid?
Factory wheels on the Ford Ranger Plug-in Hybrid are 18x7.5J at ET55 offset, front and rear.
What is the biggest wheel size I can fit on my Ford Ranger Plug-in Hybrid without rubbing?
The most aggressive fitment we recommend without fender work is 20x9.0J at ET25 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Ford Ranger Plug-in Hybrid?
For a flush look with minimal to no rubbing, we recommend 18x8.5J at ET30 offset as a starting point on a stock or mildly lowered Ford Ranger Plug-in Hybrid.
Do I need wheel spacers for my Ford Ranger Plug-in Hybrid?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Ford Ranger Plug-in Hybrid?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.93" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Ford Ranger Plug-in Hybrid?
The Ford Ranger Plug-in Hybrid runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M14x1.5, conical-seat lug nut.
Factory Torque Spec: 135 Nm (100 ft-lb). Ford Ranger (current generation) spec on M14x1.5 studs; earlier Ranger generations used M12x1.5 or M14x2.0 threads, confirm for your exact model year.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-25. Spotted an error? Email info@ankusi.com and we will verify and correct it.