Vossen HF-2-Style Gunmetal Mesh Forged Wheels
Replica · Gunmetal
2025 MG ONE Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting MG ONE wheels? This page gives the 2025 MG ONE bolt pattern (5x112), centre bore, factory rim size and the offset range for aftermarket and forged MG ONE rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2025 MG ONE uses a 5x112 bolt pattern with a 57.1 mm centre bore. For aftermarket wheels, 19x8.5J ET35 sits flush.
Forged wheels for the 2025 MG ONE — drilled 5x112 with a 57.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
MG ONE (2025) wheel fitment guide: 5x112 bolt pattern, 57.1mm center bore, factory 18x7.5J ET41 wheels. Flush and aggressive forged wheel fitment specs from ANKUSI.
Bolt Pattern5x112
Center Bore57.1mm
Year2025
CategorySUV
Data check: published sources disagree on part of this vehicle's hub data, and we are reviewing it. Measure your hub or ask us before ordering. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | 19x8.5J at ET35 offset |
Forged Wheel Designs for the MG ONE
Every design below is forged to order, so it can be machined to the MG ONE's 5x112 bolt pattern and 57.1 mm center bore, with the width and offset calculated for your setup.
APEX-Style Brushed Silver 10-Spoke Concave Forged Wheels
Concave · Brushed Silver
Gloss Silver 10-Spoke Forged Wheels
Monoblock · Gloss Silver
Advan-Style Bronze 5-Spoke Forged Wheels
Monoblock · Bronze
Gloss Black 12-Spoke Machined Face Concave Forged Wheels
Concave · Gloss Black
Rohana-Style Bronze 10 Directional-Spoke Forged Wheels
Monoblock · Bronze
WF R2-Style Gold 5 Y-Spoke Side-Milled Forged Wheels
Replica · Gold
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan — a heavier wheel amplifies body roll and slows steering response exactly where the platform is already working hardest. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The MG ONE ships from the factory on a 5x112 bolt pattern with a 57.1mm center bore and a 18x7.5J ET41 wheel. Our flush reference for the MG ONE is 19x8.5J ET35.; our maximum aggressive reference is 20x8.5J ET30. — beyond that, expect clearance issues against the fender liner without further modification.
MG ONE OE Wheel Specs
The MG ONE ships from the factory on 5x112 bolt pattern wheels with a 57.1mm center bore. The stock wheel size is 18x7.5J ET41, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the MG ONE (2025) we drill the 5x112 pattern and cut the centre bore to 57.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as: wheel width (in) / 2 + offset (mm) / 25.4 + 0.5.
- OE 18x7.5J ET41: backspacing ≈ 5.86"
- Flush 19x8.5J ET35: backspacing ≈ 6.13"
- Max 20x8.5J ET30: backspacing ≈ 5.93"
Use our offset & backspacing calculator to fine-tune your fitment, or contact ANKUSI for a custom forged wheel quote for your MG ONE.
Vehicles With the Same Hub as the MG ONE (5x112, 57.1 mm Bore)
In our database, 407 other vehicle entries from 18 makes use exactly the same 5x112 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.6% of the vehicle pages in our English fitment guide (1,407 of 6,503); 29.0% of those also use a 57.1 mm center bore.
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the MG ONE use?
The 2025 MG ONE uses a 5x112 bolt pattern.
How many lug bolts does the MG ONE use?
The MG ONE uses a 5-lug bolt pattern (5x112), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the MG ONE?
The MG ONE's center bore is 57.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What does a flush wheel fitment look like on the MG ONE?
For a flush look with minimal to no rubbing, we recommend 19x8.5J at ET35 offset as a starting point on a stock or mildly lowered MG ONE.
Do I need wheel spacers for my MG ONE?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my MG ONE?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.13" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my MG ONE?
The MG ONE runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.