Work-Style Matte Bronze 5-Spoke 2-Piece Riveted Deep Lip Forged Wheels
2-Piece · Matte Bronze / Polished Lip
2021 Haval H6 HEV Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Haval H6 HEV wheels? This page gives the 2021 Haval H6 HEV bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Haval H6 HEV rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2021 Haval H6 HEV uses a 5x114.3 bolt pattern with a 66.6 mm centre bore. Factory wheels: 19x8J ET45. For aftermarket wheels, 20x8.5J ET35 sits flush.
Forged wheels for the 2021 Haval H6 HEV — drilled 5x114.3 with a 66.6 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Haval H6 HEV (2021): 5x114.3 bolt pattern, 66.6mm center bore, OE 19x8J ET45. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x114.3
Center Bore66.6mm
Year2021
CategorySUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 19x8J ET45 |
| Flush Fitment | 20x8.5J at ET35 offset |
Forged Wheel Designs for the Haval H6 HEV
Every design below is forged to order, so it can be machined to the Haval H6 HEV's 5x114.3 bolt pattern and 66.6 mm center bore, with the width and offset calculated for your setup.
Gray Deep Lip Forged Wheels
Deep Dish · Gray
Honda Civic Type R Forged Wheels
Monoblock
Vossen HF-7-Style Matte Silver Custom Forged Wheels
Replica · Matte Silver
BBS RI-D-Style Gloss Black Magnesium Alloy Forged Wheels
Replica · Gloss Black
Gunmetal Directional Milled Machined Face Forged Wheels
Monoblock · Gunmetal
Forgestar-Style Gloss Black 9-Spoke Beadlock Forged Wheels
Off-Road Beadlock · Gloss Black
Gloss Black / Mirror Milled Mesh Beadlock Forged Wheels
Off-Road Beadlock · Gloss Black / Mirror Milled
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Because an SUV's center of gravity is already higher than a sedan's, anything added at the corners — including wheel weight — has an outsized effect on handling balance. A forged wheel lets us hit the visual stance owners want without adding the rotational mass a cast wheel of the same strength would carry.
The Haval H6 HEV ships from the factory on a 5x114.3 bolt pattern with a 66.6mm center bore and a 19x8J ET45 wheel. Our flush reference for the Haval H6 HEV is 20x8.5J ET35.; our maximum aggressive reference is 20x9J ET30. — beyond that, expect clearance issues against the fender liner without further modification.
Haval H6 HEV OE Wheel Specs
The Haval H6 HEV ships from the factory on 5x114.3 bolt pattern wheels with a 66.6mm center bore. The stock wheel size is 19x8J ET45, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Haval H6 HEV (2021) we drill the 5x114.3 pattern and cut the centre bore to 66.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x8J | ET45 | 6.27 in (159 mm) | — | — |
| Flush | 20x8.5J | ET35 | 6.13 in (156 mm) | −4 mm | +16 mm |
| Maximum | 20x9J | ET30 | 6.18 in (157 mm) | −2 mm | +28 mm |
Vehicles With the Same Hub as the Haval H6 HEV (5x114.3, 66.6 mm Bore)
In our database, 14 other vehicle entries from 5 makes use exactly the same 5x114.3 bolt pattern and 66.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 1.2% of those also use a 66.6 mm center bore.
Hub-Centric Rings for a 66.6 mm Center Bore
A wheel with a center bore larger than 66.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 67.1 mm | 67.1 → 66.6 mm |
| 70.1 mm | 70.1 → 66.6 mm |
| 70.5 mm | 70.5 → 66.6 mm |
| 71.6 mm | 71.6 → 66.6 mm |
| 73.1 mm | 73.1 → 66.6 mm |
ANKUSI forged wheels are bored to exactly 66.6 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Haval H6 HEV use?
The 2021 Haval H6 HEV uses a 5x114.3 bolt pattern.
How many lug bolts does the Haval H6 HEV use?
The Haval H6 HEV uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Haval H6 HEV?
The Haval H6 HEV's center bore is 66.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Haval H6 HEV?
Factory wheels on the Haval H6 HEV are 19x8J ET45.
What does a flush wheel fitment look like on the Haval H6 HEV?
For a flush look with minimal to no rubbing, we recommend 20x8.5J at ET35 offset as a starting point on a stock or mildly lowered Haval H6 HEV.
Do I need wheel spacers for my Haval H6 HEV?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Haval H6 HEV?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.13" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Haval H6 HEV?
The Haval H6 HEV runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x8 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.