Chinese Car Bolt Patterns at the 2026 Paris Motor Show: 10 Models Checked

Chinese car bolt patterns at the 2026 Paris Motor Show come down to three: 5x108, 5x114.3 and 5x120. The bolt pattern alone does not tell you whether a wheel fits, though. Brands from the same group often share a pattern but use different center bores, so a wheel that bolts on can still sit off-center on the hub.

This guide lists the confirmed bolt patterns and center bores for the Chinese models in Paris and on sale in Europe. Every figure was checked against two independent sources. Where we could not confirm a number, we say so instead of guessing.

Key facts: Chinese car bolt patterns in Europe

• Three patterns dominate. Of 874 Chinese-brand model pages in the ANKUSI fitment database (October 2026), 37% use 5x114.3, 29% use 5x108 and 22% use 4x100. Together these three cover about 88% of the list.
• Geely brands share Volvo's hub. The Zeekr 001, Zeekr 7X and Zeekr X use a 5x108 bolt pattern with a 63.4 mm center bore. That is the same hub as the Volvo EX30 and the smart #1.
• Same pattern, different bore at Chery. The Omoda 5 and the Jaecoo 7 both use 5x108. Their center bores differ by 5 mm (60.1 mm and 65.1 mm), so their wheels are not a direct swap.

The 2026 Paris Motor Show runs from 13 to 18 October, with press day on 12 October. Auto Express lists more than ten Chinese brands in its show guide, including BYD, Chery's Omoda and Jaecoo brands, Geely, Zeekr and Leapmotor.

Chinese car bolt patterns and center bores by model

Bolt pattern (PCD) is the number of wheel studs and the diameter of the circle they sit on. Center bore (CB) is the size of the hole in the middle of the wheel that centers it on the hub. A wheel must match the bolt pattern exactly. Its center bore must be the same as the hub, or larger with a hub-centric ring to fill the gap.

\n

\n

Sources: the ANKUSI model pages linked above and avtoreference.com. The Zeekr 001 figures were also matched against a second wheel catalogue.

Still being confirmed

We have not yet found two sources that agree for the Leapmotor C10, B10 and T03. For the BYD Atto 3 the sources we checked disagree on the center bore: some list 60.1 mm and others 64.1 mm. Until this is settled, measure the original wheel or check the hub before ordering for these cars. The BYD Dolphin and Denza D9 figures above were added on 13 October 2026 after a third source confirmed them.

BYD uses two bolt patterns in Europe

BYD splits its European range between two bolt patterns. The compact Atto 3 uses 5x114.3. The larger Seal, Seal U and Sealion 7 use 5x120 with a 64.1 mm center bore. For the Atto 3 our sources disagree on the center bore (60.1 mm or 64.1 mm), so check the hub before ordering.

So an Atto 3 wheel will not bolt onto a Seal. For a Seal or Sealion 7, a gloss black riveted 5x120 forged wheel made to the 64.1 mm bore will fit without hub rings.

Geely, Zeekr and Volvo share one hub

Every Geely-group car in our table uses a 5x108 bolt pattern with a 63.4 mm center bore. That includes the Geely Monjaro, the Zeekr 001, 7X and X, the smart #1 and the Volvo EX30. This is the long-standing Volvo hub, and Geely has carried it across its newer brands.

For owners, this is the most flexible group in the show. A wheel made for this hub can move between these cars, as long as the offset and load rating suit each one. A satin black windowed-disc forged wheel for the Zeekr 001 and a gloss black 5 Y-spoke forged wheel for the Monjaro are built on the same 5x108 / 63.4 mm base.

See every brand and model in the Geely fitment hub and the Volvo fitment hub.

Chery's Omoda and Jaecoo: same pattern, different bore

The Omoda 5 and the Jaecoo 7 come from the same Chery group and both use 5x108. Their center bores are different, though: 60.1 mm on the Omoda 5 and 65.1 mm on the Jaecoo 7.

This matters when buying wheels second-hand or across models:

1. A wheel with a 60.1 mm bore will not go onto a 65.1 mm hub at all.
2. A wheel with a 65.1 mm bore will go onto a 60.1 mm hub, but it needs a 65.1-to-60.1 hub-centric ring to sit centered.
3. Without the ring, the wheel is centered only by the lug nuts, which often causes vibration at motorway speeds.

Browse every Chery-group model in the Chery fitment hub.

How Chinese bolt patterns changed after 2020

Newer Chinese cars have moved from 4x100 to five-lug patterns, mostly 5x114.3. In our two-source verified data, 4x100 is used by 23 of 40 Chinese model entries launched from 2010 to 2019, but by only 9 of 103 entries from 2020 onward.

Source: ANKUSI fitment database, October 2026. The table counts only the 147 Chinese-brand model entries (newest year of each model) whose bolt pattern and center bore are confirmed by two independent sources; four entries from before 2010, all 4x100, are not shown. Geely accounts for 103 of the 147 entries, so the split is weighted toward Geely. Models still waiting for a second source are left out. See how we verify wheel fitment data.

The practical point: a wheel from an older 4x100 Chinese hatchback or sedan will not fit most current Chinese SUVs, and the five-lug models split further by center bore. Among the verified 5x114.3 entries, the most common bores are 54.1 mm, 60.1 mm and 67.1 mm, so check the bore as well as the pattern.

How to check a wheel before you buy

Bolt pattern and center bore are the first two checks, but not the only ones. Before ordering, confirm these four numbers against your car:

• Bolt pattern: must match exactly (5x108 is not 5x110 or 5x112).
• Center bore: same as the hub, or larger with a hub-centric ring.
• Offset (ET): controls how far the wheel sits in or out of the arch. Use our offset and backspacing calculator to compare sizes.
• Load rating: heavy EVs need wheels rated for their axle weight.

Our forged wheel fitment verification checklist walks through each step in order. For XPeng owners, the G6 uses 5x112 with a 60.1 mm bore. A satin black slotted-disc forged wheel for the G6 and G9 is made to that spec.

Where this data comes from

The figures in this article come from the ANKUSI open wheel fitment dataset, which covers more than 9,000 model and year rows. We publish Chinese car bolt patterns and center bores only after checking each one against a second, independent source. Anyone can download the data from our open wheel fitment dataset or query it through the wheel fitment API.

We will add to these Chinese car bolt patterns as new models from the show reach European roads and their wheel specifications are confirmed.

Related forged wheels

Satin black windowed-disc forged wheel for the Zeekr 001 and 007 (5x108)

Request a quote

Gloss black 5 Y-spoke forged wheel for the Geely Monjaro (5x108)

Request a quote

Gloss black riveted forged wheel for BYD 5x120 models

Request a quote

Satin black slotted-disc forged wheel for the XPeng G6 and G9 (5x112)

Request a quote

See more wheels by bolt pattern on the 5x108, 5x114.3 and 5x120 pages.