Saab OEM-Style Hyper Silver Turbine 10-Spoke Forged Wheels
Monoblock · Hyper Silver
1960 Saab 95 Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Saab 95 wheels? This page gives the 1960 Saab 95 bolt pattern (5x110), centre bore, factory rim size and the offset range for aftermarket and forged Saab 95 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 1960 Saab 95 uses a 5x110 bolt pattern with a 65.1 mm centre bore and M12x1.5 lug bolts. For aftermarket wheels, 15x4.5J ET30 sits flush.
Forged wheels for the 1960 Saab 95 — drilled 5x110 with a 65.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Saab 95 (1960) wheel fitment guide: 5x110 bolt pattern, 65.1mm center bore, factory 15x4J ET40 wheels. Flush and aggressive forged wheel fitment specs from ANKUSI.
Bolt Pattern5x110
Wheel Bolt/NutM12x1.5 Bolt
Center Bore65.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year1960
Category5-Lug Standard Sedan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | 15x4.5J at ET30 offset |
Forged Wheel Designs for the Saab 95
Every design below is forged to order, so it can be machined to the Saab 95's 5x110 bolt pattern and 65.1 mm center bore, with the width and offset calculated for your setup.
Saab OEM-Style Transparent Gray 6-Spoke Side-Milled Forged Wheels
Monoblock · Transparent Gray
Silver Mesh Forged Wheels
Monoblock · Silver
Gloss Black Double 6-Spoke Forged Wheels
Monoblock · Gloss Black
Saab OEM-Style Matte Silver 5 Y-Spoke Forged Wheels
Replica · Matte Silver
Corvette OEM-Style Custom Finish Deep Lip Forged Wheels
Monoblock · Custom Finish
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A sedan's wheel spec is a balance point the factory tuned between ride comfort, steering feel, and everyday durability. Forging lets us hold that same structural margin while cutting rotational mass, which is where most of the real-world benefit — quicker steering response, marginally better ride — actually comes from.
The Saab 95 ships from the factory on a 5x110 bolt pattern with a 65.1mm center bore and a 15x4J ET40 wheel. Our flush reference for the Saab 95 is 15x4.5J ET30.; our maximum aggressive reference is 15x5J ET25. — beyond that, expect clearance issues against the fender liner without further modification.
Saab 95 OE Wheel Specs
The Saab 95 ships from the factory on 5x110 bolt pattern wheels with a 65.1mm center bore. The stock wheel size is 15x4J ET40, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Saab 95 (1960) we drill the 5x110 pattern and cut the centre bore to 65.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as: wheel width (in) / 2 + offset (mm) / 25.4 + 0.5.
- OE 15x4J ET40: backspacing ≈ 4.07"
- Flush 15x4.5J ET30: backspacing ≈ 3.93"
- Max 15x5J ET25: backspacing ≈ 3.98"
Use our offset & backspacing calculator to fine-tune your fitment, or contact ANKUSI for a custom forged wheel quote for your Saab 95.
Vehicles With the Same Hub as the Saab 95 (5x110, 65.1 mm Bore)
In our database, 139 other vehicle entries from 19 makes use exactly the same 5x110 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x110 is used by 2.2% of the vehicle pages in our English fitment guide (145 of 6,503); 96.6% of those also use a 65.1 mm center bore.
Hub-Centric Rings for a 65.1 mm Center Bore
A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.1 mm | 66.1 → 65.1 mm |
| 66.6 mm | 66.6 → 65.1 mm |
| 67.1 mm | 67.1 → 65.1 mm |
| 70.1 mm | 70.1 → 65.1 mm |
| 73.1 mm | 73.1 → 65.1 mm |
ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Saab 95 use?
The 1960 Saab 95 uses a 5x110 bolt pattern.
How many lug bolts does the Saab 95 use?
The Saab 95 uses a 5-lug bolt pattern (5x110), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Saab 95?
The Saab 95's center bore is 65.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What does a flush wheel fitment look like on the Saab 95?
For a flush look with minimal to no rubbing, we recommend 15x4.5J at ET30 offset as a starting point on a stock or mildly lowered Saab 95.
Do I need wheel spacers for my Saab 95?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Saab 95?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 3.93" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Saab 95?
The Saab 95 runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.