SAAB Machined Face 10-Spoke Y-Design Forged Wheels
Saab 9-5 SportWagon Fitment · 19-22in, 5x120
Saab Wheel Fitment Guide
40 fitment guides for Saab, covering 1950 to 2012, spanning 4x108, 4x114.3, 5x100, 5x110, 5x120, 5x170, 6x120 and 6x127 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Saab Bolt Pattern & Center Bore Notes
Based on the 40 Saab fitment guides we cover, we have documented 8 distinct bolt pattern / center bore combinations across different Saab platforms and model years:
- 5x110 bolt pattern, 65.1mm center bore — 26 models we cover, spanning 1959–2010.
- 5x170 bolt pattern, 71.6mm center bore — 4 models we cover, spanning 1950–1970.
- 4x114.3 bolt pattern, 71.5mm center bore — 3 models we cover, spanning 1976–1985.
- 6x127 bolt pattern, 78.1mm center bore — 2 models we cover, spanning 2006–2008.
- 5x120 bolt pattern, 66.9mm center bore — 2 models we cover, spanning 2010–2012.
- 4x108 bolt pattern, 65.1mm center bore — 1 model we cover, spanning 1998.
- 5x100 bolt pattern, 56.1mm center bore — 1 model we cover, spanning 2005.
- 6x120 bolt pattern, 66.9mm center bore — 1 model we cover, spanning 2012.
Do not mix platforms: a wheel forged for one Saab bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Saab model, year, and trim and we will confirm the correct spec before production — no guessing required.
How to check the bolt pattern on your Saab
The most common Saab fitment in our guide is 5x110 with a 65.1 mm center bore (26 of 40 model years we cover).
- Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
- No stamping? Measure center-to-center between two adjacent lug holes. For 5x110 that distance is 64.7 mm (PCD × sin(180° / 5)). A 2 mm difference already means a different bolt pattern.
- Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
5x110 / 65.1mm center bore
9-3 (11)
2001 Saab 9-3 Aero Wheels: 5x110 Bolt Pattern & Offset2002 Saab 9-3 Aero Convertible Wheels: 5x110 Bolt Pattern2002 Saab 9-3 Aero Coupe Wheels: 5x110 Bolt Pattern & Offset2002 Saab 9-3 Coupe Wheels: 5x110 Bolt Pattern & Offset2005 Saab 9-3 Sport Sedan Wheels: 5x110 Bolt Pattern & Offset2006 Saab 9-3 Convertible 20 Years Edition Wheels (5x110)2006 Saab 9-3 Convertible BioPower Wheels: 5x110 Bolt Pattern2006 Saab 9-3 SportSedan Aero Wheels: 5x110 Bolt Pattern2008 Saab 9-3 Convertible Wheels: 5x110 Bolt Pattern & Offset2008 Saab 9-3 SportCombi Wheels: 5x110 Bolt Pattern & Offset2008 Saab 9-3 Wheels: 5x110 Bolt Pattern, Offset & Rim Size
95 (4)
93 (3)
900 (3)
9-5 (3)
5x170 / 71.6mm center bore
Sonett (2)
4x114.3 / 71.5mm center bore
6x127 / 78.1mm center bore
5x120 / 66.9mm center bore
4x108 / 65.1mm center bore
5x100 / 56.1mm center bore
6x120 / 66.9mm center bore
Forged Wheels for Saab
Forged-to-order wheel designs matched to Saab bolt patterns. Every set is machined to your exact model, offset and center bore.
Saab OEM-Style Matte Silver 5 Y-Spoke Forged Wheels
Saab 9-3 / 9-5 Fitment · 5-Lug
Saab OEM-Style Transparent Gray 6-Spoke Side-Milled Forged Wheels
Saab 9-3 / 9-5 Fitment · 5-Lug
Saab OEM-Style Hyper Silver Turbine 10-Spoke Forged Wheels
Saab 9-3 / 9-5 Fitment · 5-Lug
SAAB High-Gloss White Polished Lip 3-Spoke Forged Wheels
Saab 9-5 SportWagon Fitment · 19-22in, 5x120
Vehicles Using 5x110 With a 65.1 mm Center Bore
In our database, 114 other vehicle entries from 18 makes use exactly the same 5x110 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x110 is used by 2.2% of the vehicle pages in our English fitment guide (145 of 6,503); 96.6% of those also use a 65.1 mm center bore.
Hub-Centric Rings for a 65.1 mm Center Bore
A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.1 mm | 66.1 → 65.1 mm |
| 66.6 mm | 66.6 → 65.1 mm |
| 67.1 mm | 67.1 → 65.1 mm |
| 70.1 mm | 70.1 → 65.1 mm |
| 73.1 mm | 73.1 → 65.1 mm |
ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.