Custom Forged Wheels for the Toyota Mirai (5x120)
ANKUSI forges custom wheels for the Toyota Mirai, drilled 5x120 with a 60.1 mm hub-centric bore, so no hub rings or adapters are needed. The factory wheel size in our database is 19x8J ET35 (model year 2022).
Recommended wheel sizes for the Toyota Mirai
| Type | Size | Offset |
|---|---|---|
| Factory (OE) | 19x8J | ET35 |
| Flush | 20x8.5J | ET38 |
| Max | 21x9J | ET35 |
Flush and max sizes are recommendations from our fitment database; check real clearance on your car before ordering. See bolt pattern and center bore by year for the Toyota Mirai
Forged wheels that can be drilled for the Toyota Mirai
Schmidt-Style Gloss Black 7 Y-Spoke Machined Lip Forged Wheels – Toyota GR86 / 3 Series F30 Fitment (5-Lug)
APEX-Style Brushed Silver 5 Split-Spoke Forged Wheels – Toyota GR86 / BMW 3 Series F30 Fitment (5-Lug)
Toyota GR86 / BMW 3 Series F30 Forged Wheels – Platinum Brushed Bright Silver 5 Y-Spoke
EvoCorse-Style Matte Black Multi-Spoke Off-Road Forged Wheels – Jeep Wrangler / Land Cruiser Fitment (5-Lug)
Advan Racing GT-Style Bright Gray 6-Spoke Deep Lip Forged Wheels - Toyota GR86 / Honda Civic Type R Fitment (5-Lug)
Advan-Style Gloss Black 5-Spoke Polished Deep Lip Forged Wheels – Toyota GR86 / Honda Civic Type R Fitment (5-Lug)
Jeep Wrangler / Land Cruiser Off-Road Forged Wheels – Matte Bronze 8-Spoke Bolt-Ring (5-Lug)
Advan-Style Gloss White 5-Spoke Forged Wheels – Toyota GR86 / Honda Civic Type R Fitment (5-Lug)Get a quote for Toyota Mirai wheels
Vehicles With the Same Hub as the Toyota Mirai (5x120, 60.1 mm Bore)
In our database, 24 other vehicle entries from 2 makes use exactly the same 5x120 bolt pattern and 60.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle entries in our database (670 of 6,503); 4.3% of those also use a 60.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x8J | ET35 | 5.88 in (149 mm) | — | — |
| Flush | 20x8.5J | ET38 | 6.25 in (159 mm) | +9 mm | +3 mm |
| Maximum | 21x9J | ET35 | 6.38 in (162 mm) | +13 mm | +13 mm |
Hub-Centric Rings for a 60.1 mm Center Bore
A wheel with a center bore larger than 60.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 63.4 mm | 63.4 → 60.1 mm |
| 64.1 mm | 64.1 → 60.1 mm |
| 65.1 mm | 65.1 → 60.1 mm |
| 66.1 mm | 66.1 → 60.1 mm |
| 73.1 mm | 73.1 → 60.1 mm |
ANKUSI forged wheels are bored to exactly 60.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
How to order
- Send your model, year and the size you want on WhatsApp.
- Our team confirms bolt pattern, center bore and offset for your car.
- The set is forged and machined to order in about 25 days, then shipped.
FAQ
How long do custom forged wheels for the Toyota Mirai take?
About 25 days of production after the specs are confirmed. Every wheel is drilled 5x120 with a 60.1 mm center bore.
What is the factory wheel size of the Toyota Mirai?
The factory size in our database is 19x8J ET35. It can vary by trim, so check your exact car before ordering.
What wheel size fits the Toyota Mirai flush?
We recommend 20x8.5J ET38 for a flush fit and 21x9J ET35 as the maximum. Check clearance before ordering.