Custom Forged Wheels for the Mitsubishi Mirage (4x100)
ANKUSI forges custom wheels for the Mitsubishi Mirage, drilled 4x100 with a 56.1 mm hub-centric bore, so no hub rings or adapters are needed. The factory wheel size in our database is 14x4.5J ET46 (model year 2020).
Recommended wheel sizes for the Mitsubishi Mirage
| Type | Size | Offset |
|---|---|---|
| Factory (OE) | 14x4.5J | ET46 |
| Flush | 15x6J | ET38 |
| Max | 16x6.5J | ET35 |
Flush and max sizes are recommendations from our fitment database; check real clearance on your car before ordering. See bolt pattern and center bore by year for the Mitsubishi Mirage
Vehicles With the Same Hub as the Mitsubishi Mirage (4x100, 56.1 mm Bore)
In our database, 36 other vehicle entries from 8 makes use exactly the same 4x100 bolt pattern and 56.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
4x100 is used by 6.9% of the vehicle entries in our database (451 of 6,503); 9.1% of those also use a 56.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 14x4.5J | ET46 | 4.56 in (116 mm) | — | — |
| Flush | 15x6J | ET38 | 5.00 in (127 mm) | +11 mm | +27 mm |
| Maximum | 16x6.5J | ET35 | 5.13 in (130 mm) | +14 mm | +36 mm |
Hub-Centric Rings for a 56.1 mm Center Bore
A wheel with a center bore larger than 56.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 57.1 mm | 57.1 → 56.1 mm |
| 60.1 mm | 60.1 → 56.1 mm |
| 63.4 mm | 63.4 → 56.1 mm |
| 64.1 mm | 64.1 → 56.1 mm |
| 73.1 mm | 73.1 → 56.1 mm |
ANKUSI forged wheels are bored to exactly 56.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
How to order
- Send your model, year and the size you want on WhatsApp.
- Our team confirms bolt pattern, center bore and offset for your car.
- The set is forged and machined to order in about 25 days, then shipped.
FAQ
How long do custom forged wheels for the Mitsubishi Mirage take?
About 25 days of production after the specs are confirmed. Every wheel is drilled 4x100 with a 56.1 mm center bore.
What is the factory wheel size of the Mitsubishi Mirage?
The factory size in our database is 14x4.5J ET46. It can vary by trim, so check your exact car before ordering.
What wheel size fits the Mitsubishi Mirage flush?
We recommend 15x6J ET38 for a flush fit and 16x6.5J ET35 as the maximum. Check clearance before ordering.