Toyota GT86 Bolt Pattern, Center Bore & Wheel Offset (2014–2017)

Toyota GT86 wheel fitment: 5x100 bolt pattern, 56.1mm center bore (2014–2017).

  • 5x100bolt pattern (PCD)
  • 56.1 mmcenter bore
  • M12x1.5 Nutwheel bolt / nut
  • 2 guidesmodel years 2014–2017

Toyota GT86 wheel specs by year and trim

YearModel / trimBolt patternCenter boreOE wheel
2017Toyota GT865x10056.1 mm17x7.0J
2014Toyota GT86 TRD5x10056.1 mm18x7.5J

Factory wheel sizes on the Toyota GT86

Across the 2 Toyota GT86 trims with a documented factory wheel, the OE diameter is 17-18 inch, width 7-7.5J. A forged wheel that keeps the 5x100 bolt pattern and the 56.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.

Forged wheels for the Toyota GT86 (5x100)

Shop all Toyota GT86 forged wheels →

Get a quote for Toyota GT86 wheels

Vehicles With the Same Hub as the Toyota GT86 (5x100, 56.1 mm Bore)

In our database, 11 other vehicle entries from 5 makes use exactly the same 5x100 bolt pattern and 56.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.

5x100 is used by 1.9% of the vehicle pages in our English fitment guide (124 of 6,503); 16.1% of those also use a 56.1 mm center bore.

Offset and Backspacing: Factory Wheel vs Options

Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.

SetupSizeETBackspacingInward vs OEOutward vs OE
Factory (OE)17x7JET485.89 in (150 mm)——
Flush18x8JET355.88 in (149 mm)0 mm+26 mm
Maximum18x9JET306.18 in (157 mm)+7 mm+43 mm

Hub-Centric Rings for a 56.1 mm Center Bore

A wheel with a center bore larger than 56.1 mm needs a hub-centric ring. The most common combinations:

Wheel boreRing size
57.1 mm57.1 → 56.1 mm
60.1 mm60.1 → 56.1 mm
63.4 mm63.4 → 56.1 mm
64.1 mm64.1 → 56.1 mm
73.1 mm73.1 → 56.1 mm

ANKUSI forged wheels are bored to exactly 56.1 mm for this vehicle, so no ring is needed.

Sources and Last Update

Bolt pattern and center bore were checked against at least two independent fitment references before publication.

This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).

Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.

FAQ

What is the bolt pattern on a Toyota GT86?

The Toyota GT86 uses a 5x100 bolt pattern with a 56.1mm center bore across every GT86 variant in our database (2 guides, 2014–2017).

What is the Toyota GT86 center bore?

The hub-centric center bore is 56.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.

Do all Toyota GT86 years share the same wheel fitment?

The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.

Which forged wheels fit the Toyota GT86?

Any wheel drilled 5x100 with a 56.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.

Contact WhatsApp Get a Quote