Skoda Karoq Bolt Pattern, Center Bore & Wheel Offset (2019–2022)
Skoda Karoq wheel fitment: 5x112 bolt pattern, 57.1mm center bore (2019–2022). OE wheel sizes and offsets for every Karoq variant we cover (3 guides), plus fl
- 5x112bolt pattern (PCD)
- 57.1 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 3 guidesmodel years 2019–2022
Skoda Karoq wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2022 | Skoda Karoq | 5x112 | 57.1 mm | 18x7J ET45 |
| 2019 | Skoda Karoq Scout | 5x112 | 57.1 mm | 18x7J ET45 |
| 2019 | Skoda Karoq Sportline | 5x112 | 57.1 mm | 19x8J ET45 |
Factory wheel sizes on the Skoda Karoq
Across the 3 Skoda Karoq trims with a documented factory wheel, the OE diameter is 18-19 inch, width 7-8J and offset ET45. A forged wheel that keeps the 5x112 bolt pattern and the 57.1 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Skoda Karoq (5x112)
Shop all Skoda Karoq forged wheels →
Get a quote for Skoda Karoq wheels
Vehicles With the Same Hub as the Skoda Karoq (5x112, 57.1 mm Bore)
In our database, 356 other vehicle entries from 17 makes use exactly the same 5x112 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.9% of the vehicle entries in our database (1,403 of 6,396); 28.9% of those also use a 57.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 18x7J | ET45 | 5.77 in (147 mm) | — | — |
| Flush | 19x8J | ET35 | 5.88 in (149 mm) | +3 mm | +23 mm |
| Maximum | 20x8.5J | ET30 | 5.93 in (151 mm) | +4 mm | +34 mm |
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Skoda Karoq?
The Skoda Karoq uses a 5x112 bolt pattern with a 57.1mm center bore across every Karoq variant in our database (3 guides, 2019–2022).
What is the Skoda Karoq center bore?
The hub-centric center bore is 57.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Skoda Karoq years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Skoda Karoq?
Any wheel drilled 5x112 with a 57.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.