Skoda Fabia Bolt Pattern, Center Bore & Wheel Offset (2005–2022)
Skoda Fabia wheel fitment: 5x100 bolt pattern, 57.1mm center bore (2005–2022). OE wheel sizes and offsets for every Fabia variant we cover (5 guides), plus fl
- 5x100bolt pattern (PCD)
- 57.1 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 5 guidesmodel years 2005–2022
Skoda Fabia wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2022 | Skoda Fabia | 5x100 | 57.1 mm | 16x6J ET46 |
| 2022 | Skoda Fabia Monte Carlo | 5x100 | 57.1 mm | 17x7J ET40 |
| 2011 | Skoda Fabia RS | 5x100 | 57.1 mm | 17x7J ET41 |
| 2011 | Skoda Fabia Scout | 5x100 | 57.1 mm | 16x6.5J ET40 |
| 2005 | Skoda Fabia Sedan | 5x100 | 57.1 mm | 14x6J ET47 |
Factory wheel sizes on the Skoda Fabia
Across the 5 Skoda Fabia trims with a documented factory wheel, the OE diameter is 14-17 inch, width 6-7J and offset ET40-47. A forged wheel that keeps the 5x100 bolt pattern and the 57.1 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Skoda Fabia (5x100)
Shop all Skoda Fabia forged wheels →
Get a quote for Skoda Fabia wheels
Vehicles With the Same Hub as the Skoda Fabia (5x100, 57.1 mm Bore)
In our database, 56 other vehicle entries from 9 makes use exactly the same 5x100 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x100 is used by 1.9% of the vehicle entries in our database (123 of 6,396); 69.1% of those also use a 57.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 16x6J | ET46 | 5.31 in (135 mm) | — | — |
| Flush | 17x7.5J | ET32 | 5.51 in (140 mm) | +5 mm | +33 mm |
| Maximum | 18x7.5J | ET28 | 5.35 in (136 mm) | +1 mm | +37 mm |
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Skoda Fabia?
The Skoda Fabia uses a 5x100 bolt pattern with a 57.1mm center bore across every Fabia variant in our database (5 guides, 2005–2022).
What is the Skoda Fabia center bore?
The hub-centric center bore is 57.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Skoda Fabia years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Skoda Fabia?
Any wheel drilled 5x100 with a 57.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.