Nissan Pathfinder Armada Bolt Pattern, Center Bore & Wheel Offset (2004)
Nissan Pathfinder Armada wheel fitment: 6x139.7 bolt pattern, 78.1mm center bore. OE wheel sizes and offsets for every Pathfinder Armada variant we cover (2 g
- 6x139.7bolt pattern (PCD)
- 78.1 mmcenter bore
- M12x1.25 Nutwheel bolt / nut
- 2 guidesmodel years 2004
Nissan Pathfinder Armada wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2004 | Nissan Pathfinder Armada | 6x139.7 | 78.1 mm | 18x8J ET25 |
| 2004 | Nissan Pathfinder Armada SE | 6x139.7 | 78.1 mm | 18x8J ET25 |
Factory wheel sizes on the Nissan Pathfinder Armada
Across the 2 Nissan Pathfinder Armada trims with a documented factory wheel, the OE diameter is 18 inch, width 8J and offset ET25. A forged wheel that keeps the 6x139.7 bolt pattern and the 78.1 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Nissan Pathfinder Armada (6x139.7)
Shop all Nissan Pathfinder Armada forged wheels →
Get a quote for Nissan Pathfinder Armada wheels
Vehicles With the Same Hub as the Nissan Pathfinder Armada (6x139.7, 78.1 mm Bore)
In our database, 73 other vehicle entries from 5 makes use exactly the same 6x139.7 bolt pattern and 78.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x139.7 is used by 3.8% of the vehicle entries in our database (244 of 6,396); 32.0% of those also use a 78.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 18x8J | ET25 | 5.48 in (139 mm) | — | — |
| Flush | 18x9J | ET12 | 5.47 in (139 mm) | 0 mm | +26 mm |
| Maximum | 20x1J | ET0 | 5.50 in (140 mm) | 0 mm | +50 mm |
Hub-Centric Rings for a 78.1 mm Center Bore
A wheel with a center bore larger than 78.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 84.1 mm | 84.1 → 78.1 mm |
| 93.1 mm | 93.1 → 78.1 mm |
| 100.1 mm | 100.1 → 78.1 mm |
| 106.1 mm | 106.1 → 78.1 mm |
ANKUSI forged wheels are bored to exactly 78.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Nissan Pathfinder Armada?
The Nissan Pathfinder Armada uses a 6x139.7 bolt pattern with a 78.1mm center bore across every Pathfinder Armada variant in our database (2 guides, 2004).
What is the Nissan Pathfinder Armada center bore?
The hub-centric center bore is 78.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Nissan Pathfinder Armada years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Nissan Pathfinder Armada?
Any wheel drilled 6x139.7 with a 78.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.