MG ZS Bolt Pattern, Center Bore & Wheel Offset (2018–2025)
MG ZS wheel fitment: 5x112 bolt pattern, 57.1mm center bore (2022–2025); 5x100 bolt pattern, 56.1mm center bore. OE wheel sizes and offsets for every ZS varia
- 5x112bolt pattern (PCD), most common
- 57.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 3 guidesmodel years 2018–2025
Bolt pattern by generation
- 5x112, 57.1 mm center bore — 2022–2025 (2 variants)
- 5x100, 56.1 mm center bore — 2018 (1 variants)
MG ZS wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2025 | MG ZS Hybrid | 5x112 | 57.1 mm | 17x7J ET41 |
| 2022 | MG ZS EV | 5x112 | 57.1 mm | — |
| 2018 | MG ZS | 5x100 | 56.1 mm | — |
Factory wheel sizes on the MG ZS
Across the 1 MG ZS trim with a documented factory wheel, the OE diameter is 17 inch, width 7J and offset ET41. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the MG ZS (5x112)
Shop all MG ZS forged wheels →
Vehicles With the Same Hub as the MG ZS (5x112, 57.1 mm Bore)
In our database, 393 other vehicle entries from 17 makes use exactly the same 5x112 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.9% of the vehicle entries in our database (1,403 of 6,396); 28.9% of those also use a 57.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 17x7J | ET41 | 5.61 in (143 mm) | — | — |
| Flush | 18x8J | ET32 | 5.76 in (146 mm) | +4 mm | +22 mm |
| Maximum | 19x8.5J | ET28 | 5.85 in (149 mm) | +6 mm | +32 mm |
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a MG ZS?
The MG ZS uses a 5x112 bolt pattern on most variants we cover with a 57.1mm center bore. Other generations use 5x100 / 56.1mm (2018–2018). Always check the exact year and trim before ordering.
What is the MG ZS center bore?
The hub-centric center bore is 57.1 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all MG ZS years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the MG ZS?
Any wheel drilled 5x112 with a 57.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.