HRE Bright Silver / Silver 5 Y-Spoke Forged Wheels
Replica · Bright Silver / Silver
2006 ABT Audi Allroad Quattro Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting ABT Audi Allroad Quattro wheels? This page gives the 2006 ABT Audi Allroad Quattro bolt pattern (5x112), centre bore, factory rim size and the offset range for aftermarket and forged ABT Audi Allroad Quattro rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2006 ABT Audi Allroad Quattro uses a 5x112 bolt pattern with a 57.1 mm centre bore and M14x1.5 lug bolts. Factory wheels: 19x8.5J, front and rear. For aftermarket wheels, 20x9.0J ET25 sits flush and 20x9.5J ET20 is the most aggressive fit.
Forged wheels for the 2006 ABT Audi Allroad Quattro — drilled 5x112 with a 57.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
ABT Audi Allroad Quattro (2006): 5x112 bolt pattern, 57.1mm center bore. Factory wheels: 19x8.5J F/R. Reference fitment ranges.
Bolt Pattern5x112
Wheel Bolt/NutM14x1.5 Bolt
Center Bore57.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2006
CategoryWagon
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 19x8.5J F/R |
| Flush Fitment | 20x9.0J at ET25 offset |
| Maximum Aggressive | 20x9.5J at ET20 offset |
Forged Wheel Designs for the ABT Audi Allroad Quattro
Every design below is forged to order, so it can be machined to the ABT Audi Allroad Quattro's 5x112 bolt pattern and 57.1 mm center bore, with the width and offset calculated for your setup.
Gloss White 10-Spoke Forged Wheels
Replica · Gloss White
BBS-Style Bright Silver 5 Split Y-Spoke Forged Wheels
Monoblock · Bright Silver
Gold 5 Y-Spoke Forged Wheels
Monoblock · Gold
Gloss Black 5 W-Spoke Split Forged Wheels
Monoblock · Gloss Black
Bright Silver Slotted Turbine Disc Forged Wheels
Monoblock · Bright Silver
Chrome 10-Spoke Deep Dish 2-Piece Forged Wheels
2-Piece · Chrome
Bright Silver 5 Y-Spoke Slotted Forged Wheels
Monoblock · Bright Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Wagons split the difference between sedan agility and load-carrying duty, and the wheels have to serve both roles. A forged wheel holds the same structural margin as the factory piece while trimming rotational weight, which benefits both the empty-car handling and the loaded-car ride.
The ABT Audi Allroad Quattro runs a 5x112 bolt pattern, 57.1mm center bore, and a 19x8.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 20x9.0J ET25, which tucks the tire under the fender lip on a stock-height ABT Audi Allroad Quattro. Our Maximum Aggressive reference is 20x9.5J ET20 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
ABT Audi Allroad Quattro OE Wheel Specs
The 2006 ABT Audi Allroad Quattro (Wagon) uses a 5x112 bolt pattern with a 57.1mm center bore. Factory wheels are 19x8.5J F/R.
Why the factory spec works for most owners:
- Keeps the factory ride quality and noise levels intact
- A common fitment for this class, so replacement tires are easy to source
- Preserves clearance around the OE brakes and suspension geometry
- Delivers predictable, easy-to-live-with handling for daily use
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the ABT Audi Allroad Quattro (2006) we drill the 5x112 pattern and cut the centre bore to 57.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 19x8.5J ET35 → ~6.13″ backspacing
- Flush: 20x9.0J ET25 → ~5.98″ backspacing
- Max: 20x9.5J ET20 → ~6.04″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact abt spec, or want a wheel built to a custom offset for your ABT Audi Allroad Quattro? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
ABT Audi Allroad Quattro: Specs by Model Year
| Year | Bolt pattern | Center bore | Factory wheel |
|---|---|---|---|
| 2002 | 5x112 | 57.1 mm | 18x8.5J |
| 2006 | 5x112 | 57.1 mm | 19x8.5J |
Bolt pattern and center bore stay the same across all 2 model years in our database (2002–2006).
Vehicles With the Same Hub as the ABT Audi Allroad Quattro (5x112, 57.1 mm Bore)
In our database, 406 other vehicle entries from 18 makes use exactly the same 5x112 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.6% of the vehicle pages in our English fitment guide (1,407 of 6,503); 29.0% of those also use a 57.1 mm center bore.
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the ABT Audi Allroad Quattro use?
The 2006 ABT Audi Allroad Quattro uses a 5x112 bolt pattern.
How many lug bolts does the ABT Audi Allroad Quattro use?
The ABT Audi Allroad Quattro uses a 5-lug bolt pattern (5x112), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the ABT Audi Allroad Quattro?
The ABT Audi Allroad Quattro's center bore is 57.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the ABT Audi Allroad Quattro?
Factory wheels on the ABT Audi Allroad Quattro are 19x8.5J F/R.
What is the biggest wheel size I can fit on my ABT Audi Allroad Quattro without rubbing?
The most aggressive fitment we recommend without fender work is 20x9.5J at ET20 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the ABT Audi Allroad Quattro?
For a flush look with minimal to no rubbing, we recommend 20x9.0J at ET25 offset as a starting point on a stock or mildly lowered ABT Audi Allroad Quattro.
Do I need wheel spacers for my ABT Audi Allroad Quattro?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my ABT Audi Allroad Quattro?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.98" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my ABT Audi Allroad Quattro?
The ABT Audi Allroad Quattro runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x8.5 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.