Mercedes-Benz Citan Bolt Pattern, Center Bore & Wheel Offset (2013–2022)
Mercedes-Benz Citan wheel fitment: 5x114.3 bolt pattern, 66.1mm center bore; 5x108 bolt pattern, 60.1mm center bore. OE wheel sizes and offsets for every Cita
- 5x114.3bolt pattern (PCD), most common
- 66.1 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 2 guidesmodel years 2013–2022
Bolt pattern by generation
- 5x114.3, 66.1 mm center bore — 2022 (1 variants)
- 5x108, 60.1 mm center bore — 2013 (1 variants)
Mercedes-Benz Citan wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2022 | Mercedes-Benz Citan | 5x114.3 | 66.1 mm | 16x6.5J ET45 |
| 2013 | Mercedes-Benz Citan | 5x108 | 60.1 mm | 15x6.0J ET45 |
Factory wheel sizes on the Mercedes-Benz Citan
Across the 2 Mercedes-Benz Citan trims with a documented factory wheel, the OE diameter is 15-16 inch, width 6-6.5J and offset ET45. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Mercedes-Benz Citan (5x114.3)
Shop all Mercedes-Benz Citan forged wheels →
Get a quote for Mercedes-Benz Citan wheels
Vehicles With the Same Hub as the Mercedes-Benz Citan (5x114.3, 66.1 mm Bore)
In our database, 222 other vehicle entries from 8 makes use exactly the same 5x114.3 bolt pattern and 66.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.1% of the vehicle entries in our database (1,284 of 6,396); 17.5% of those also use a 66.1 mm center bore.
Hub-Centric Rings for a 66.1 mm Center Bore
A wheel with a center bore larger than 66.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.6 mm | 66.6 → 66.1 mm |
| 67.1 mm | 67.1 → 66.1 mm |
| 70.1 mm | 70.1 → 66.1 mm |
| 70.5 mm | 70.5 → 66.1 mm |
| 73.1 mm | 73.1 → 66.1 mm |
ANKUSI forged wheels are bored to exactly 66.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Mercedes-Benz Citan?
The Mercedes-Benz Citan uses a 5x114.3 bolt pattern on most variants we cover with a 66.1mm center bore. Other generations use 5x108 / 60.1mm (2013–2013). Always check the exact year and trim before ordering.
What is the Mercedes-Benz Citan center bore?
The hub-centric center bore is 66.1 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Mercedes-Benz Citan years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Mercedes-Benz Citan?
Any wheel drilled 5x114.3 with a 66.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.