2011 Jaguar XF Black Pack Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Jaguar XF Black Pack wheels? This page gives the 2011 Jaguar XF Black Pack bolt pattern (5x108), centre bore, factory rim size and the offset range for aftermarket and forged Jaguar XF Black Pack rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2011 Jaguar XF Black Pack uses a 5x108 bolt pattern with a 63.4 mm centre bore and M12x1.5 lug nuts. Factory wheels: 20x8.5J ET49. For aftermarket wheels, 20x9J ET40 sits flush.
Forged wheels for the 2011 Jaguar XF Black Pack — drilled 5x108 with a 63.4 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Jaguar XF Black Pack (2011): 5x108 bolt pattern, 63.4mm center bore, OE 20x8.5J ET49. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x108
Wheel Bolt/NutM12x1.5 Nut
Center Bore63.4mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Year2011
Category5-Lug Performance / Tuner
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 20x8.5J ET49 |
| Flush Fitment | 20x9J at ET40 offset |
Forged Wheel Designs for the Jaguar XF Black Pack
Every design below is forged to order, so it can be machined to the Jaguar XF Black Pack's 5x108 bolt pattern and 63.4 mm center bore, with the width and offset calculated for your setup.
Jaguar OEM-Style Silver Slotted Dish Forged Wheels
Monoblock · Silver
Chrome 5 W-Spoke Forged Wheels
Monoblock · Chrome
Jaguar OEM-Style Gunmetal 5-Spoke Forged Wheels
Monoblock · Gunmetal
Jaguar OEM-Style Custom Finish Directional Machined Face Forged Wheels
Monoblock · Custom Finish
Jaguar OEM-Style Gloss Black 10 Y-Spoke Forged Wheels
Monoblock · Gloss Black
Jaguar OEM-Style Light Gunmetal 5-Spoke Deep Lip Forged Wheels
Deep Dish · Light Gunmetal
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Most of the engineering value in a forged wheel over a cast one shows up in rotational mass, not outright strength — both can meet the same load rating, but the forged piece gets there lighter. On a sedan platform tuned for everyday balance, that weight saving is felt directly in steering response and ride quality.
The Jaguar XF Black Pack ships from the factory on a 5x108 bolt pattern with a 63.4mm center bore and a 20x8.5J ET49 wheel. Our flush reference for the Jaguar XF Black Pack is 20x9J ET40.; our maximum aggressive reference is 21x9.5J ET35. — beyond that, expect clearance issues against the fender liner without further modification.
Jaguar XF Black Pack OE Wheel Specs
The Jaguar XF Black Pack ships from the factory on 5x108 bolt pattern wheels with a 63.4mm center bore. The stock wheel size is 20x8.5J ET49, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Jaguar XF Black Pack (2011) we drill the 5x108 pattern and cut the centre bore to 63.4mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 20x8.5J | ET49 | 6.68 in (170 mm) | — | — |
| Flush | 20x9J | ET40 | 6.57 in (167 mm) | −3 mm | +15 mm |
| Maximum | 21x9.5J | ET35 | 6.63 in (168 mm) | −1 mm | +27 mm |
Vehicles With the Same Hub as the Jaguar XF Black Pack (5x108, 63.4 mm Bore)
In our database, 278 other vehicle entries from 17 makes use exactly the same 5x108 bolt pattern and 63.4 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x108 is used by 7.7% of the vehicle pages in our English fitment guide (499 of 6,503); 55.9% of those also use a 63.4 mm center bore.
Hub-Centric Rings for a 63.4 mm Center Bore
A wheel with a center bore larger than 63.4 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 64.1 mm | 64.1 → 63.4 mm |
| 65.1 mm | 65.1 → 63.4 mm |
| 66.1 mm | 66.1 → 63.4 mm |
| 66.6 mm | 66.6 → 63.4 mm |
| 73.1 mm | 73.1 → 63.4 mm |
ANKUSI forged wheels are bored to exactly 63.4 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Jaguar XF Black Pack use?
The 2011 Jaguar XF Black Pack uses a 5x108 bolt pattern.
How many lug bolts does the Jaguar XF Black Pack use?
The Jaguar XF Black Pack uses a 5-lug bolt pattern (5x108), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Jaguar XF Black Pack?
The Jaguar XF Black Pack's center bore is 63.4mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Jaguar XF Black Pack?
Factory wheels on the Jaguar XF Black Pack are 20x8.5J ET49.
What does a flush wheel fitment look like on the Jaguar XF Black Pack?
For a flush look with minimal to no rubbing, we recommend 20x9J at ET40 offset as a starting point on a stock or mildly lowered Jaguar XF Black Pack.
Do I need wheel spacers for my Jaguar XF Black Pack?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Jaguar XF Black Pack?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.57" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Jaguar XF Black Pack?
The Jaguar XF Black Pack runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 20x8.5 wheels · 20 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.